How to install the Camshaft Position Sensor on 2009 Scion xB?

The Camshaft Position Sensor installation requires applying a small amount of engine oil on the O-ring before installing the sensor with a torque rating of 9.0 Nm (90 kgf-cm, 80 in-lbf) using the specified bolt. Connect the sensor connector subsequently. The work procedure continues by mounting the air cleaner cap sub-assembly along with the No. 1 air cleaner hose before executing an engine oil leak check. Install the No. 1 engine cover sub-assembly as the last step.

OEM 2009 Scion xB Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2009 Scion xB Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2009 Scion xB Camshaft Position Sensor

Looking for affordable OEM 2009 Scion xB Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2009 Scion xB Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xB Parts Questions & Experts Answers

Q: How to install the Camshaft Position Sensor on 2009 Scion xB?
A: The Camshaft Position Sensor installation requires applying a small amount of engine oil on the O-ring before installing the sensor with a torque rating of 9.0 Nm (90 kgf-cm, 80 in-lbf) using the specified bolt. Connect the sensor connector subsequently. The work procedure continues by mounting the air cleaner cap sub-assembly along with the No. 1 air cleaner hose before executing an engine oil leak check. Install the No. 1 engine cover sub-assembly as the last step.