OEM 2008 Toyota Yaris Oxygen Sensor

2008 Toyota Yaris Oxygen Sensor Parts Q&A

• Q: How to install the Heated Oxygen Sensor on 2008 Toyota Yaris?

  A: Special Service Tool: 09224-00010 should be used for connecting the Heated Oxygen Sensor to the front exhaust pipe while maintaining a torque of 44 Nm (449 kgf-cm, 32 ft-lbf) without the tool or 40 Nm (408 kgf-cm, 30 ft-lbf) with the tool by utilizing a torque wrench with a fulcrum length of 300 mm (11.81 in.). Prior to connecting the sensor connector you need to pass it through the floor panel and add the grommet before completion. Install the Instrument Pad Lower LH for Sedan followed by the Rear Console Box Assembly which redirects to installing the Console Box Carpet followed by the Console Box Rear Cover for Hatchback. To continue with the assembly install the Console Upper Rear Panel Sub-Assembly for Sedan and the Shifting Hole Cover Sub-Assembly for Hatchback Manual Transaxle followed by the Upper Console Panel Sub-Assembly for Sedan. Rephrase the following sentence. Install the Sub-Assembly for Shift Lever Knob of Manual Transaxle combined with Instrument Panel Finish Panel End LH for Sedan and Instrument Panel Finish Panel Lower Center for Sedan. The cable requires tightening to the negative battery terminal at 5.4 Nm (55 kgf-cm, 48 in-lbf) torque while inspecting for exhaust gas leakage.