How to install the Engine Control Module (ECM) on 2008 Toyota Yaris?

An installation of the 1NZ-FE engine control system's Engine Control Module requires inserting ECM bracket No. 2 with two screws and installing the ECM bracket with an additional two screws. Start by fastening the ECM with one bolt and two nuts then tighten them to 8.0 Nm torque. After that, connect both ECM connectors and mount the two lock knobs along with the harness clamp. When working on the hatchback model install the cowl top panel outer but sedan owners should first install the cowl top panel outer with 8 bolts tightened to 6.5 Nm (66 kgf-cm, 58 in-lbf) and then install the cowl top panel outer center bracket with 2 bolts at the same torque before engaging the wire harness to the claw. You should install the front air shutter seal on the sedan using 3 claws for attachment. Mount the cowl to register duct sub-assembly No. 2 on the hatchback while fitting the windshield wiper motor and links to both vehicle types. The installer should mount the cowl top ventilator louver LH alongside installing its matching sub-assembly for hatchback systems and sedan-specific sub-assemblies. The hood to cowl top seal should be installed on the hatchback while the sedan requires the cowl side ventilator sub-assemblies LH and RH. The next step includes the installation of front wiper arm and blade assembly LH and RH for both hatchback and sedan before applying the front wiper arm head cap to match each variant. The cable requires tightening to a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf) before it gets attached to the negative battery terminal.

OEM 2008 Toyota Yaris Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Control Modules found

View related parts
2008 Toyota Yaris ECM
Part Number: 89661-52G52
$761.80 MSRP: $1116.43
You Save: $354.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Replaces: 89661-52F11, 89661-52G50, 89661-52F10, 89661-52G51
- Item Weight: 1.90 Pounds
- Condition: New
- SKU: 89661-52G52
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris ECM
Part Number: 89661-52G31
$620.61 MSRP: $909.50
You Save: $288.89 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Replaces: 89661-52E91, 89661-52E90
- Condition: New
- SKU: 89661-52G31
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris ECM
Part Number: 89661-52F00
$641.72 MSRP: $940.44
You Save: $298.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.6 x 10.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-52F00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris ECM
Part Number: 89661-52G41
$590.46 MSRP: $865.33
You Save: $274.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.6 x 10.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-52G41
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris ECM
Part Number: 89661-52G40
$590.46 MSRP: $865.33
You Save: $274.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.7 x 9.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-52G40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2008 Toyota Yaris ECM
Part Number: 89661-52G30
$517.08 MSRP: $757.79
You Save: $240.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Engine Control; Engine Control Module
- Part Name Code: 89661
- Item Weight: 2.20 Pounds
- Item Dimensions: 13.0 x 10.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89661-52G30
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS

2008 Toyota Yaris Engine Control Module

Looking for affordable OEM 2008 Toyota Yaris Engine Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota Yaris Engine Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Yaris Parts Questions & Experts Answers

Q: How to install the Engine Control Module (ECM) on 2008 Toyota Yaris?
A: An installation of the 1NZ-FE engine control system's Engine Control Module requires inserting ECM bracket No. 2 with two screws and installing the ECM bracket with an additional two screws. Start by fastening the ECM with one bolt and two nuts then tighten them to 8.0 Nm torque. After that, connect both ECM connectors and mount the two lock knobs along with the harness clamp. When working on the hatchback model install the cowl top panel outer but sedan owners should first install the cowl top panel outer with 8 bolts tightened to 6.5 Nm (66 kgf-cm, 58 in-lbf) and then install the cowl top panel outer center bracket with 2 bolts at the same torque before engaging the wire harness to the claw. You should install the front air shutter seal on the sedan using 3 claws for attachment. Mount the cowl to register duct sub-assembly No. 2 on the hatchback while fitting the windshield wiper motor and links to both vehicle types. The installer should mount the cowl top ventilator louver LH alongside installing its matching sub-assembly for hatchback systems and sedan-specific sub-assemblies. The hood to cowl top seal should be installed on the hatchback while the sedan requires the cowl side ventilator sub-assemblies LH and RH. The next step includes the installation of front wiper arm and blade assembly LH and RH for both hatchback and sedan before applying the front wiper arm head cap to match each variant. The cable requires tightening to a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf) before it gets attached to the negative battery terminal.