How to install the outer mirror switch for the sedan on 2008 Toyota Yaris?

First you should put the 2 claws in place while installing the outer mirror switch and proceed to connect the connector. After that, install the instrument panel box while maintaining proper alignment of all components. The cable needs to be attached to the negative battery terminal while applying a torque setting of 5.4 Nm (55 kgf-cm, 48 in-lbf).

OEM 2008 Toyota Yaris Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2008 Toyota Yaris Mirror Switch, Outer
Part Number: 84870-34010
$151.90 MSRP: $215.03
You Save: $63.13 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Outer Mirror; Door Mirror Switch, Front; Power Mirror Switch
- Position: Outer
- Part Name Code: 84870A
- Item Weight: 0.50 Pounds
- Item Dimensions: 14.1 x 11.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84870-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

2008 Toyota Yaris Mirror Switch

Looking for affordable OEM 2008 Toyota Yaris Mirror Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Yaris Mirror Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Yaris Parts Questions & Experts Answers

Q: How to install the outer mirror switch for the sedan on 2008 Toyota Yaris?
A: First you should put the 2 claws in place while installing the outer mirror switch and proceed to connect the connector. After that, install the instrument panel box while maintaining proper alignment of all components. The cable needs to be attached to the negative battery terminal while applying a torque setting of 5.4 Nm (55 kgf-cm, 48 in-lbf).