How to service the Crankshaft Position Sensor on 2007 Toyota Highlander?

Service of the Crankshaft Position Sensor begins by removing engine under cover No.1 through the separation of its 6 screws and 2 clips. You should start by removing the front fender apron seal RH through the process of disconnection of the clip and 2 bolts. Unplug the sensor connector followed by bolt and clamp removal of the sensor part. Insert the sensor and clamp into their proper positions while securing them with the bolt at 9.0 N.m (92 kgf.cm, 80 in.lbf) torque then reconnect the sensor connector. After installing the front fender apron seal RH by attaching its clip then securing 2 bolts you must replace the engine under cover No.1 by tightening its screws and reinstalling its 2 clips.

OEM 2007 Toyota Highlander Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2007 Toyota Highlander Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Highlander Crankshaft Position Sensor
Part Number: 90080-19024
$131.47 MSRP: $186.11
You Save: $54.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 90919-05047
- Part Name Code: 11301K
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.4 x 12.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19024
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2007 Toyota Highlander Crankshaft Position Sensor
Part Number: 90080-19009
$77.72 MSRP: $109.10
You Save: $31.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Part Name Code: 15100R
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19009
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS

2007 Toyota Highlander Crankshaft Position Sensor

Looking for affordable OEM 2007 Toyota Highlander Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Highlander Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Highlander Parts Questions & Experts Answers

Q: How to service the Crankshaft Position Sensor on 2007 Toyota Highlander?
A: Service of the Crankshaft Position Sensor begins by removing engine under cover No.1 through the separation of its 6 screws and 2 clips. You should start by removing the front fender apron seal RH through the process of disconnection of the clip and 2 bolts. Unplug the sensor connector followed by bolt and clamp removal of the sensor part. Insert the sensor and clamp into their proper positions while securing them with the bolt at 9.0 N.m (92 kgf.cm, 80 in.lbf) torque then reconnect the sensor connector. After installing the front fender apron seal RH by attaching its clip then securing 2 bolts you must replace the engine under cover No.1 by tightening its screws and reinstalling its 2 clips.