How to service the Crankshaft Position Sensor on 2006 Toyota Highlander?

Service of the Crankshaft Position Sensor starts with the removal of engine under cover No.1 through 6 screws and 2 clips detachment. The next step involves removing the front fender apron seal RH after you detach its clip and 2 bolts. Inspector the sensor connection then unmount the bolt while also removing the clamp in addition to the sensor. Starting installation requires the sensor and clamp to be positioned correctly with the bolt which must reach a torque level of 9.0 N.m (92 kgf.cm, 80 in..lbf). The entire procedure includes reconnecting the sensor connector followed by installing the front fender apron seal RH with its retaining clip and 2 bolts and then working on engine under cover No.1 which demands 2 clips and 6 screws installation.

OEM 2006 Toyota Highlander Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2006 Toyota Highlander Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Highlander Crankshaft Position Sensor
Part Number: 90080-19024
$131.47 MSRP: $186.11
You Save: $54.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 90919-05047
- Part Name Code: 11301K
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.4 x 12.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19024
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2006 Toyota Highlander Crankshaft Position Sensor
Part Number: 90080-19009
$77.72 MSRP: $109.10
You Save: $31.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Part Name Code: 15100R
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19009
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS

2006 Toyota Highlander Crankshaft Position Sensor

Looking for affordable OEM 2006 Toyota Highlander Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Highlander Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Highlander Parts Questions & Experts Answers

Q: How to service the Crankshaft Position Sensor on 2006 Toyota Highlander?
A: Service of the Crankshaft Position Sensor starts with the removal of engine under cover No.1 through 6 screws and 2 clips detachment. The next step involves removing the front fender apron seal RH after you detach its clip and 2 bolts. Inspector the sensor connection then unmount the bolt while also removing the clamp in addition to the sensor. Starting installation requires the sensor and clamp to be positioned correctly with the bolt which must reach a torque level of 9.0 N.m (92 kgf.cm, 80 in..lbf). The entire procedure includes reconnecting the sensor connector followed by installing the front fender apron seal RH with its retaining clip and 2 bolts and then working on engine under cover No.1 which demands 2 clips and 6 screws installation.