How to replace the Crankshaft Position Sensor on Toyota Highlander?

The procedure to replace a Crankshaft Position Sensor starts with the removal of engine under cover No.1 through six screws and two clips and one under cover. The front fender apron seal RH must be removed after removing its clip and 2 bolts while also unfastening the apron seal. The crankshaft position sensor needs its connector disconnected before separating the bolt along with the clamp and sensor. Start by placing the sensor together with its clamp followed by the bolt application until it reaches a torque measurement of 9.0 N.m (92 kgf.cm, 80 in.lbf) then reconnect the sensor connector. You must replace the front fender apron seal RH by securing the clip and 2 bolts before reinstalling the engine under cover No.1 with its 6 screws and 2 clips.

OEM Toyota Highlander Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Crankshaft Position Sensors found

View related parts
Toyota Highlander Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Highlander | Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, L, LE, LE Plus, Limited, Limited Platinum, Platinum, Plus, SE, Sport, XLE, XSE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Sensor, Crank Position
Part Number: 90919-05071
$95.62 MSRP: $134.22
You Save: $38.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Crankshaft Position Sensor
Part Number: 90080-19024
$131.47 MSRP: $186.11
You Save: $54.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 90919-05047
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Highlander | Base | 4 Cyl 2.4 L GAS
View related parts
Toyota Highlander Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2010 Toyota Highlander | Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Crankshaft Position Sensor
Part Number: 90919-A5004
$94.43 MSRP: $132.56
You Save: $38.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Sensor, Crankshaft Pulse; Crankshaft Sensor; Camshaft Position Sensor
- Replaces: 90919-05070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2019 Toyota Highlander | Base, LE, Plus, SE | 4 Cyl 2.7 L GAS
View related parts
Toyota Highlander Sensor, Crank Position
Part Number: 90919-A5003
$68.48 MSRP: $96.12
You Save: $27.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2016 Toyota Highlander | Base, Hybrid, Hybrid Limited, LE, LE Plus, Limited, Plus, SE, Sport, XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Camshaft Position Sensor, Passenger Side
Part Number: 90919-05061
$117.97 MSRP: $165.58
You Save: $47.61 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Right; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Crankshaft Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: NO.1
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2022 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, L, LE, LE Plus, Limited, Limited Platinum, Platinum, SE, XLE, XSE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Crankshaft Position Sensor
Part Number: 90080-19009
$77.72 MSRP: $109.10
You Save: $31.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2010 Toyota Highlander | Base, Hybrid, Hybrid Limited, Limited, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Crankshaft Position Sensor
Part Number: 90919-05093
$102.02 MSRP: $143.20
You Save: $41.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2019 Toyota Highlander | LE, LE Plus, Limited, Limited Platinum, SE, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Sensor, Camshaft Position
Part Number: 90919-A5007
$97.99 MSRP: $137.54
You Save: $39.55 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Sensor, Crank Position
Part Number: 90919-A5006
$96.92 MSRP: $136.05
You Save: $39.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Replaces: 90919-05095
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Sensor, Crank Position
Part Number: 90919-A5005
$97.63 MSRP: $137.05
You Save: $39.42 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor
- Replaces: 90919-05094
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Highlander | L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS
View related parts
Toyota Highlander Crankshaft Position Sensor
Part Number: 90919-05100
$102.02 MSRP: $143.20
You Save: $41.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Manufacturer Note: LE PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2022 Toyota Highlander | L, LE, LE Plus, Limited, Limited Platinum, Platinum, SE, XLE, XSE | 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Crankshaft Position Sensor
Part Number: 90919-05090
$98.22 MSRP: $137.88
You Save: $39.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)

Toyota Highlander Crankshaft Position Sensor

If you're thinking about purchasing OEM parts for your Toyota Highlander, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander Crankshaft Position Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Highlander Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
90080-19009
Q: How to replace the Crankshaft Position Sensor on Toyota Highlander?
A: The procedure to replace a Crankshaft Position Sensor starts with the removal of engine under cover No.1 through six screws and two clips and one under cover. The front fender apron seal RH must be removed after removing its clip and 2 bolts while also unfastening the apron seal. The crankshaft position sensor needs its connector disconnected before separating the bolt along with the clamp and sensor. Start by placing the sensor together with its clamp followed by the bolt application until it reaches a torque measurement of 9.0 N.m (92 kgf.cm, 80 in.lbf) then reconnect the sensor connector. You must replace the front fender apron seal RH by securing the clip and 2 bolts before reinstalling the engine under cover No.1 with its 6 screws and 2 clips.