How to service the Camshaft Position Sensor on 2007 Toyota Highlander?

To service the Camshaft Position Sensor, remove the air cleaner assembly, disconnect the sensor, and remove it. Apply engine oil to a new O-ring, install it on the sensor, and secure it with a bolt at 9.0 N.m torque. Finally, reinstall the air cleaner assembly.

OEM 2007 Toyota Highlander Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2007 Toyota Highlander Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS

2007 Toyota Highlander Camshaft Position Sensor

Looking for affordable OEM 2007 Toyota Highlander Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Highlander Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Highlander Camshaft Position Sensor Parts Q&A

Q: How to service the Camshaft Position Sensor on 2007 Toyota Highlander?
A: To service the Camshaft Position Sensor, remove the air cleaner assembly, disconnect the sensor, and remove it. Apply engine oil to a new O-ring, install it on the sensor, and secure it with a bolt at 9.0 N.m torque. Finally, reinstall the air cleaner assembly.