Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Position: Front
Replaces: 89831-35010
Item Weight: 0.60 Pounds
Item Dimensions: 4.4 x 2.6 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-35011
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
Position: Front
Item Weight: 1.40 Pounds
Item Dimensions: 4.7 x 2.9 x 2.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-39375
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
Manufacturer Note: SRS AIR BAG-WITH(CURTAIN SHIELD)
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 4.2 x 2.6 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89831-35020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Air Bag Sensor; Seat; Sensor, Seat Position Air Bag
Position: Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.1 x 1.6 x 1.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-0W010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
2007 Toyota FJ Cruiser Air Bag Sensor
Looking for affordable OEM 2007 Toyota FJ Cruiser Air Bag Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota FJ Cruiser Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota FJ Cruiser Air Bag Sensor Parts Q&A
Q: How to service the Center Air Bag Sensor Assembly on 2007 Toyota FJ Cruiser?
A: Begin the service of the Center Air Bag Sensor Assembly by first reading all available information about restraint system precautions. The negative battery terminal cable needs to get disconnected while waiting at minimum 90 seconds to stop any possible Air Bag deployment. The necessary removal steps include taking out the Instrument Panel Garnish LH and RH and Integration Control and Panel Assembly followed by the Shift Lever Knob Sub-Assembly (for Manual Transaxle and 4WD) and Parking Brake Hole Cover Subassembly then the Console Upper Rear Panel Subassembly alongside Box Bottom Mat and Front Console Box and Console Upper Panel No.1 Garnish and Instrument Lower Cover Subassembly. By disconnecting the holder with connectors from the Center Air Bag Sensor Assembly and removing its three bolts. The technician should follow these steps for Center Air Bag Sensor Assembly installation: Disable the ignition with a disconnected negative battery terminal for at least 90 seconds. Then install the three bolts on the assembly before tightening to 17.5 N.m (179 kgf.cm, 13 ft.lbf). After installation ensure that each portion of the assembly is tight and the SRS wiring does not cause any damage to other components or pinch against anything. The holder with connectors must install into position while double-checking the water-proof sheet is correctly in place. Begin the reinstallation process by placing back the Instrument Lower Cover Subassembly, Console Upper Panel No.1 Garnish, Front Console Box, Box Bottom Mat, Console Upper Rear Panel Subassembly, Parking Brake Hole Cover Subassembly, Shift Lever Knob Sub-Assembly and Integration Control and Panel Assembly as well as Instrument Panel Garnish RH and LH following by connecting the cable to a negative battery terminal with a torque of 3.9 N.m (40 kgf.cm, 35 in.lbf). Perform initialization since some systems need it after reconnecting the cable while also inspecting the SRS warning light.