How to replace the Lower Control Arm Assembly LH on 2005 Toyota 4Runner?

The first step to replace the Lower Control Arm Assembly LH involves removing the rear wheel initially. First separate the parking brake cable assembly No.3 by removing the bolt then disconnecting it from its position. The procedure to remove the lower control arm assembly LH requires you to sever the assembly's connection from the rear axle housing by discarding the nut along with washer and bolt. Keep the bolt steady by gripping the nut throughout this operation. To replace the Lower Control Arm Assembly LH consumers should first remove the nut, washer and bolt from the rear axle housing by turning and retrieving the bolt with nut retention. Install the lower control arm assembly first and fasten the nut and washer as well as the bolt only temporarily. To proceed with assembly install the rear axle housing then fasten the bolt and washer and nut with minimum restraint. Position the parking brake cable assembly No.3 into place using a bolt then tighten it at 13 Nm (127 kgf-cm, 9 ft. lbs.). Lay the rear wheel in position and tighten it to 112 Nm (1,137 kgf-cm, 83 ft. lbs.). Secure the suspension system then completely tighten the two bolts of lower control arm assembly LH by using 130 Nm torque (1,326 kgf-cm, 96 ft. lbs.) but maintain steady pressure on the nut while rotating the bolt.

OEM 2005 Toyota 4Runner Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
2005 Toyota 4Runner Arm Assembly, Front Suspension, Upper Driver Side
Part Number: 48630-60040
$284.98 MSRP: $406.89
You Save: $121.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm; Control Arm
- Position: Upper Driver Side
- Replaces: 48630-60020
- Part Name Code: 48630
- Item Weight: 6.30 Pounds
- Item Dimensions: 18.4 x 6.5 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-60040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- 40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2005 Toyota 4Runner Upper Control Arm, Passenger Side
Part Number: 48610-60070
$284.98 MSRP: $406.89
You Save: $121.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Replaces: 48610-60050
- Part Name Code: 48610
- Item Weight: 5.70 Pounds
- Item Dimensions: 18.3 x 6.8 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-60070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- 40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2005 Toyota 4Runner Lower Control Arm, Driver Side
Part Number: 48069-60010
$341.34 MSRP: $500.24
You Save: $158.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 42.40 Pounds
- Item Dimensions: 21.0 x 16.6 x 18.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-60010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2005 Toyota 4Runner Arm Sub-Assembly, Front Suspension, Lower Passenger Side
Part Number: 48068-60010
$340.46 MSRP: $486.10
You Save: $145.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 43.20 Pounds
- Item Dimensions: 19.2 x 3.5 x 18.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-60010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2005 Toyota 4Runner Control Arm

Looking for affordable OEM 2005 Toyota 4Runner Control Arm? Explore our comprehensive catalogue of genuine 2005 Toyota 4Runner Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota 4Runner Parts Questions & Experts Answers

Q: How to replace the Lower Control Arm Assembly LH on 2005 Toyota 4Runner?
A: The first step to replace the Lower Control Arm Assembly LH involves removing the rear wheel initially. First separate the parking brake cable assembly No.3 by removing the bolt then disconnecting it from its position. The procedure to remove the lower control arm assembly LH requires you to sever the assembly's connection from the rear axle housing by discarding the nut along with washer and bolt. Keep the bolt steady by gripping the nut throughout this operation. To replace the Lower Control Arm Assembly LH consumers should first remove the nut, washer and bolt from the rear axle housing by turning and retrieving the bolt with nut retention. Install the lower control arm assembly first and fasten the nut and washer as well as the bolt only temporarily. To proceed with assembly install the rear axle housing then fasten the bolt and washer and nut with minimum restraint. Position the parking brake cable assembly No.3 into place using a bolt then tighten it at 13 Nm (127 kgf-cm, 9 ft. lbs.). Lay the rear wheel in position and tighten it to 112 Nm (1,137 kgf-cm, 83 ft. lbs.). Secure the suspension system then completely tighten the two bolts of lower control arm assembly LH by using 130 Nm torque (1,326 kgf-cm, 96 ft. lbs.) but maintain steady pressure on the nut while rotating the bolt.