How to Service and Repair the Control Arm on 2001 Toyota Tacoma?

The first step to repair or service a lower control arm requires wheel removal at 110 Nm torque along with 110 Nm torque on the front wheel. The coil spring requires compression through Special Service Tool 09727-22011 (09727-23010, 09727-23020, 09727-23030, 09727-23040) by inserting the fork at the coil spring's center area followed by turning along its length. The service requires removing 2 stabilizer bar nuts and the stabilizer bar link with 2 retainers and 2 cushions before torquing the stabilizer bar side to 29.5 Nm (300 kgf-cm, 22 ft. lbs.) and the lower arm side to 90 Nm (920 kgf-cm, 66 ft. lbs.). Next, use 29 Nm (300 kgf-cm, 22 ft. lbs.) torque on the 2 stabilizer bar bracket set bolts. Brace the upper suspension arm and steering knuckle safely before unscrewing the nut with 110 Nm torque (1,100 kgf-cm, 80 ft. lbs.) while tightening it another 60 degrees beyond normal procedure if the cotter pin alignment needs correction. The special service tool 09628-62011 should be used to disconnect the lower ball joint from the lower suspension arm while protecting the lower ball joint boot. Liberate the lower suspension arm set bolt and remove its nut at 200 Nm torque while loosening the strut bar front set bolt with 300 Nm torque to finally remove the lower suspension arm with the strut bar. The Special Service Tool and coil spring should be removed while maintaining contact between the coil spring end and the lower suspension arm seat. Two nuts from the lower suspension arm need removal at a torque value of 150 Nm (1,530 kgf-cm, 111 ft. lbs.) before extracting the nut and spring bumper at 43 Nm (440 kgf-cm, 32 ft. lbs.). To install a new bushing start by removing the tube edge from its shaded area and orienting it cutface down while using Special Service Tool: 09710-30021 (09710-03071, 09710-03141) with a press. A new bushing installation requires Special Service Tool: 09710-30021 (09710-03101, 09710-03141) and a press to operate from behind. Resistance removal proceeds backward from installation and a wheel alignment examination should be performed after installation completion.

OEM 2001 Toyota Tacoma Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Control Arms found

View related parts
2001 Toyota Tacoma Upper Control Arm, Passenger Side
Part Number: 48610-35040
$208.74 MSRP: $298.03
You Save: $89.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48610
- Item Weight: 5.40 Pounds
- Item Dimensions: 11.9 x 6.8 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-35040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Pre Runner, S-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Lower Control Arm, Driver Side
Part Number: 48069-35110
$134.50 MSRP: $190.41
You Save: $55.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 9.60 Pounds
- Item Dimensions: 17.6 x 12.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-35110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Lower Control Arm, Passenger Side
Part Number: 48068-35110
$162.96 MSRP: $230.69
You Save: $67.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 18.20 Pounds
- Item Dimensions: 17.9 x 12.9 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-35110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Lower Control Arm, Driver Side
Part Number: 48069-35120
$210.63 MSRP: $300.73
You Save: $90.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Manufacturer Note: (J)
- Position: Lower Driver Side
- Replaces: 48069-35060, 48069-35061, 48069-04010, 48069-04011
- Part Name Code: 48069
- Item Weight: 15.50 Pounds
- Item Dimensions: 15.3 x 15.8 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Upper Control Arm, Driver Side
Part Number: 48630-35030
$208.74 MSRP: $298.03
You Save: $89.29 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Left Upper; Arm Assembly, Front Suspension, Upper Driver Side; Suspension Control Arm; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48630
- Item Weight: 5.30 Pounds
- Item Dimensions: 16.2 x 3.6 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-35030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Upper Control Arm, Passenger Side
Part Number: 48610-35050
$208.74 MSRP: $298.03
You Save: $89.29 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48610
- Item Weight: 3.40 Pounds
- Item Dimensions: 16.1 x 3.6 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-35050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Upper Control Arm, Driver Side
Part Number: 48067-35050
$363.72 MSRP: $533.04
You Save: $169.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Upper; Arm Sub-Assembly, Front Suspension, Upper Driver Side; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48067
- Item Weight: 9.30 Pounds
- Item Dimensions: 18.2 x 12.3 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48067-35050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Upper Control Arm, Passenger Side
Part Number: 48066-35120
$363.72 MSRP: $533.04
You Save: $169.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Upper Passenger Side; Control Arm
- Position: Upper Passenger Side
- Part Name Code: 48066
- Item Weight: 9.20 Pounds
- Item Dimensions: 18.2 x 12.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48066-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Lower Control Arm, Passenger Side
Part Number: 48068-35120
$212.97 MSRP: $304.08
You Save: $91.11 (30%)
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Manufacturer Note: (J)
- Position: Passenger Side
- Replaces: 48068-04010, 48068-04011, 48068-35061, 48068-35060
- Part Name Code: 48068
- Item Weight: 16.10 Pounds
- Item Dimensions: 18.2 x 12.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Upper Control Arm, Driver Side
Part Number: 48067-35070
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Upper; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Upper Driver Side; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48067
- Item Weight: 9.00 Pounds
- Item Dimensions: 18.1 x 12.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48067-35070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Upper Control Arm, Passenger Side
Part Number: 48066-35140
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Upper Passenger Side; Control Arm
- Position: Upper Passenger Side
- Part Name Code: 48066
- Item Weight: 8.80 Pounds
- Item Dimensions: 17.7 x 12.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48066-35140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2001 Toyota Tacoma Control Arm

Looking for affordable OEM 2001 Toyota Tacoma Control Arm? Explore our comprehensive catalogue of genuine 2001 Toyota Tacoma Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Tacoma Parts Questions & Experts Answers

Q: How to Service and Repair the Control Arm on 2001 Toyota Tacoma?
A: The first step to repair or service a lower control arm requires wheel removal at 110 Nm torque along with 110 Nm torque on the front wheel. The coil spring requires compression through Special Service Tool 09727-22011 (09727-23010, 09727-23020, 09727-23030, 09727-23040) by inserting the fork at the coil spring's center area followed by turning along its length. The service requires removing 2 stabilizer bar nuts and the stabilizer bar link with 2 retainers and 2 cushions before torquing the stabilizer bar side to 29.5 Nm (300 kgf-cm, 22 ft. lbs.) and the lower arm side to 90 Nm (920 kgf-cm, 66 ft. lbs.). Next, use 29 Nm (300 kgf-cm, 22 ft. lbs.) torque on the 2 stabilizer bar bracket set bolts. Brace the upper suspension arm and steering knuckle safely before unscrewing the nut with 110 Nm torque (1,100 kgf-cm, 80 ft. lbs.) while tightening it another 60 degrees beyond normal procedure if the cotter pin alignment needs correction. The special service tool 09628-62011 should be used to disconnect the lower ball joint from the lower suspension arm while protecting the lower ball joint boot. Liberate the lower suspension arm set bolt and remove its nut at 200 Nm torque while loosening the strut bar front set bolt with 300 Nm torque to finally remove the lower suspension arm with the strut bar. The Special Service Tool and coil spring should be removed while maintaining contact between the coil spring end and the lower suspension arm seat. Two nuts from the lower suspension arm need removal at a torque value of 150 Nm (1,530 kgf-cm, 111 ft. lbs.) before extracting the nut and spring bumper at 43 Nm (440 kgf-cm, 32 ft. lbs.). To install a new bushing start by removing the tube edge from its shaded area and orienting it cutface down while using Special Service Tool: 09710-30021 (09710-03071, 09710-03141) with a press. A new bushing installation requires Special Service Tool: 09710-30021 (09710-03101, 09710-03141) and a press to operate from behind. Resistance removal proceeds backward from installation and a wheel alignment examination should be performed after installation completion.

Related 2001 Toyota Tacoma Parts

Alternate Year Models

2000 Toyota Tacoma Control Arm 2002 Toyota Tacoma Control Arm