My Garage
Cart
Make sure this part fits

Toyota 48069-35120
Lower Control Arm, Driver Side

1995-2004 Toyota Tacoma 4806935120

Customer Questions & Expert Answers (8)
Toyota 48069-35120 Lower Control Arm, Driver Side
Toyota 48069-35120 Lower Control Arm, Driver Side
  • Part Description
    Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower
  • Part Name Code
    48069
  • Position
    Lower Driver Side
  • Replaces
    48069-35060, 48069-35061, 48069-04010, 48069-04011
  • Manufacturer
    Toyota
Make sure this part fits
$210.63 MSRP: $300.73
You Save: $90.10 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code48069
    Manufacturer Part Number48069-35120
    Part DescriptionArm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower
    Other NamesArm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
    Manufacturer Note(J)
    Item Dimensions15.3 x 15.8 x 15.3 inches
    Item Weight15.50 Pounds
    PositionLower Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces48069-35060, 48069-35061, 48069-04010, 48069-04011
    ManufacturerToyota
    SKU48069-35120
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2004 Toyota TacomaBase, DLX, Limited, Pre Runner, SR5, S-Runner4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 48069-35120 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48069-35120 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you disconnect the upper ball joint for the 2001 Toyota Tacoma? Posted by Customer
    A:
    Remove the cotter pin and loosen the nut to a torque of 105 Nm (1,100 kgf-cm, 80 ft. lbs.). If the cotter pin hole is misaligned during installation, tighten the nut further up to 60°.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the procedure for the lower ball joint for the 2003 Toyota Tacoma? Posted by Customer
    A:
    Support the upper suspension arm and steering knuckle, then remove the cotter pin and nut with a torque of 140 Nm (1,450 kgf-cm, 103 ft. lbs.), tightening the nut further up to 60° if the cotter pin holes are misaligned.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    How do you disconnect the upper ball joint for the 2003 Toyota Tacoma? Posted by Customer
    A:
    Remove the cotter pin and loosen the nut to a torque of 105 Nm (1,100 kgf-cm, 80 ft. lbs.). If the cotter pin hole is misaligned during installation, tighten the nut further up to 60°.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What should be checked after completing the installation for the 2000 Toyota Tacoma? Posted by Customer
    A:
    Check the front wheel alignment.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    How do you disconnect the stabilizer bar for the 2004 Toyota Tacoma? Posted by Customer
    A:
    Remove 2 nuts, the stabilizer bar link, 2 retainers, and 2 cushions, applying a torque of 29.5 Nm (300 kgf-cm, 22 ft. lbs.) on the stabilizer bar side and 90 Nm (920 kgf-cm, 66 ft. lbs.) on the lower arm side, followed by removing the 2 stabilizer bar bracket set bolts with a torque of 29 Nm (300 kgf-cm, 22 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the process for removing the upper suspension arm for the 2002 Toyota Tacoma? Posted by Customer
    A:
    Remove the nut, bolt, and 2 washers, applying a torque of 115 Nm (1,200 kgf-cm, 87 ft. lbs.) during installation after stabilizing the suspension.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    Q:
    What is the procedure for removing the lower suspension arm for the 2001 Toyota Tacoma? Posted by Customer
    A:
    Loosen the lower suspension arm set bolt and remove the nut with a torque of 200 Nm (2,050 kgf-cm, 148 ft. lbs.), and similarly, loosen the strut bar front set bolt and remove the nut with a torque of 300 Nm (3,050 kgf-cm, 221 ft. lbs.), pulling out the 2 bolts to remove the lower suspension arm with the strut bar.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48069-35120, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48069-35120 Lower Control Arm, Driver Side. It is sometimes referred to as Toyota Control Arm. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4806935120 Lower Control Arm, Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery