How to Service and Repair the Lower Control Arm on 2000 Toyota Tacoma?

The lower control arm servicing process for all RZN191L-TRPDKAB, RZN196L-CRPDKAB, and VZN195L-CRPDKAB models begins with performing a front wheel removal step followed by reaching a torque value of 110 Nm (1,150 kgf-cm, 83 ft. lbs.). Separate the steering gear assembly from the stabilizer bar link by losing the nut with a torque of 69 Nm (700 kgf-cm, 51 ft. lbs.). Before removal the shock absorber requires both the lower nut and washer to be taken off with a torque of 135 Nm (1,400 kgf-cm, 101 ft. lbs.). After this detach the suspension arm while lowering it. The procedure for the lower ball joint starts with supporting both the upper suspension arm and steering knuckle after which you can disconnect the cotter pin and nut by applying 140 Nm (1,450 kgf-cm, 103 ft. lbs.) torque while performing additional nut tightening up to 60 if the pin holes are misaligned. Use Special Service Tool: 09628-62011 to separate the lower ball joint from the lower suspension arm. Maintain ball joint quality while orienting the cotter pin hole toward the front when reinstallation occurs. Proceed by marking the adjusting cams front and back before loosening the nuts and adjusting cams and bolt and suspension arm with a torque of 130 Nm (1,325 kgf-cm, 96 ft. lbs.). You need to use Special Service Tool: 09922-10010 to uninstall the No. 1 and No. 2 spring bumpers while applying a torque of 23 Nm (235 kgf-cm, 17 ft. lbs.) with a torque wrench that has a 345 mm (13.58 inch) fulcrum length. After finishing the installation process proceed with checking front wheel alignment. The installation sequence follows the opposite order to removal.

OEM 2000 Toyota Tacoma Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Control Arms found

View related parts
2000 Toyota Tacoma Upper Control Arm, Passenger Side
Part Number: 48610-35030
$194.31 MSRP: $277.43
You Save: $83.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48610
- Item Weight: 5.30 Pounds
- Item Dimensions: 16.5 x 3.5 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-35030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Upper Control Arm, Driver Side
Part Number: 48630-35010
$228.56 MSRP: $326.34
You Save: $97.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Left Upper; Arm Assembly, Front Suspension, Upper Driver Side; Suspension Control Arm; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48630
- Item Weight: 5.40 Pounds
- Item Dimensions: 16.1 x 3.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Upper Control Arm, Driver Side
Part Number: 48067-35050
$363.72 MSRP: $533.04
You Save: $169.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Upper; Arm Sub-Assembly, Front Suspension, Upper Driver Side; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48067
- Item Weight: 9.30 Pounds
- Item Dimensions: 18.2 x 12.3 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48067-35050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Upper Control Arm, Passenger Side
Part Number: 48066-35120
$363.72 MSRP: $533.04
You Save: $169.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Upper Passenger Side; Control Arm
- Position: Upper Passenger Side
- Part Name Code: 48066
- Item Weight: 9.20 Pounds
- Item Dimensions: 18.2 x 12.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48066-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Lower Control Arm, Driver Side
Part Number: 48069-35120
$210.63 MSRP: $300.73
You Save: $90.10 (30%)
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Manufacturer Note: (J)
- Position: Lower Driver Side
- Replaces: 48069-35060, 48069-35061, 48069-04010, 48069-04011
- Part Name Code: 48069
- Item Weight: 15.50 Pounds
- Item Dimensions: 15.3 x 15.8 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Lower Control Arm, Passenger Side
Part Number: 48068-35120
$212.97 MSRP: $304.08
You Save: $91.11 (30%)
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Manufacturer Note: (J)
- Position: Passenger Side
- Replaces: 48068-04010, 48068-04011, 48068-35061, 48068-35060
- Part Name Code: 48068
- Item Weight: 16.10 Pounds
- Item Dimensions: 18.2 x 12.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-35120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Lower Control Arm, Passenger Side
Part Number: 48068-35070
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 9.00 Pounds
- Item Dimensions: 18.2 x 12.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-35070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Lower Control Arm, Driver Side
Part Number: 48069-35070
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 9.00 Pounds
- Item Dimensions: 17.6 x 12.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-35070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2000 Toyota Tacoma Control Arm

Looking for affordable OEM 2000 Toyota Tacoma Control Arm? Explore our comprehensive catalogue of genuine 2000 Toyota Tacoma Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Tacoma Control Arm Parts Q&A

Q: How to Service and Repair the Lower Control Arm on 2000 Toyota Tacoma?
A: The lower control arm servicing process for all RZN191L-TRPDKAB, RZN196L-CRPDKAB, and VZN195L-CRPDKAB models begins with performing a front wheel removal step followed by reaching a torque value of 110 Nm (1,150 kgf-cm, 83 ft. lbs.). Separate the steering gear assembly from the stabilizer bar link by losing the nut with a torque of 69 Nm (700 kgf-cm, 51 ft. lbs.). Before removal the shock absorber requires both the lower nut and washer to be taken off with a torque of 135 Nm (1,400 kgf-cm, 101 ft. lbs.). After this detach the suspension arm while lowering it. The procedure for the lower ball joint starts with supporting both the upper suspension arm and steering knuckle after which you can disconnect the cotter pin and nut by applying 140 Nm (1,450 kgf-cm, 103 ft. lbs.) torque while performing additional nut tightening up to 60 if the pin holes are misaligned. Use Special Service Tool: 09628-62011 to separate the lower ball joint from the lower suspension arm. Maintain ball joint quality while orienting the cotter pin hole toward the front when reinstallation occurs. Proceed by marking the adjusting cams front and back before loosening the nuts and adjusting cams and bolt and suspension arm with a torque of 130 Nm (1,325 kgf-cm, 96 ft. lbs.). You need to use Special Service Tool: 09922-10010 to uninstall the No. 1 and No. 2 spring bumpers while applying a torque of 23 Nm (235 kgf-cm, 17 ft. lbs.) with a torque wrench that has a 345 mm (13.58 inch) fulcrum length. After finishing the installation process proceed with checking front wheel alignment. The installation sequence follows the opposite order to removal.

Related 2000 Toyota Tacoma Parts

Alternate Year Models

1999 Toyota Tacoma Control Arm 2001 Toyota Tacoma Control Arm