Other Name: Flasher Assembly, Turn Signal; Hazard Warning Flasher; Multi Purpose Relay; Turn Signal Flasher; Relay; Flasher
Replaces: 81980-46010
Fits the following Toyota Models:
Corolla | 2009-2013 | Base, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
Matrix | 2009-2013 | Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
Prius | 2004-2015 | Base, Five, Four, One, Persona Series, Three, Touring, Two | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Prius Plug-In | 2012-2015 | Base | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
RAV4 | 2006-2012 | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Flasher Assembly, Turn Signal; Hazard Warning and Turn Signal Flasher; Hazard Warning Flasher; Accessory Power Relay; Turn Signal Flasher; Flasher
Replaces: 81980-50020, 81980-0E010
Fits the following Toyota Models:
Camry | 2005-2006 | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
Highlander | 2001-2013 | Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Tundra | 2000-2002 | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
Other Name: Flasher Assembly, Turn Signal; Hazard Warning and Turn Signal Flasher; Hazard Warning Flasher; Accessory Delay Relay; Turn Signal Flasher; Flasher; Flasher, Turn Signal
Fits the following Toyota Models:
Sequoia | 2008-2015 | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Tundra | 2007-2017 | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Flasher Assembly, Turn Signal; Hazard Warning and Turn Signal Flasher; Hazard Warning Flasher; Accessory Delay Relay; Turn Signal Flasher; Flasher; Flasher, Turn Signal
4Runner | 1991-2002 | Base, Limited, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
Avalon | 1995-1997 | XL, XLS | 6 Cyl 3.0 L GAS
Camry | 1989-2003 | Base, CE, DLX, DLX All Trac, DX, LE, LE All Trac, SE, XLE | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
Celica | 1990-2005 | All Trac, GT, GTS, GTS All Trac, ST | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
Corolla | 1991-2002 | Base, CE, DLX, DLX All Trac, DX, GTS, LE, S, SR5, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
Cressida | 1989-1992 | Luxury | 6 Cyl 3.0 L GAS
Land Cruiser | 1991-1997 | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.5 L GAS
MR2 | 1991-1995 | Base, Turbo | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
Paseo | 1992-1997 | Base, Convertible | 4 Cyl 1.5 L GAS
Pickup | 1991-1995 | Base, DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
Q: How to remove the Turn Signal Flasher Assembly on Toyota Camry?
A: You must start the Turn Signal Flasher Assembly removal procedure by taking off the Front Door Scuff Plate LH then proceed with removing the Cowl Side Trim Sub-Assembly LH. You must detach the Lower Instrument Panel Finish Panel LH and then the Steering Column Cover. First remove the No. 1 Instrument Panel Sub-Assembly then disconnect the Lower Instrument Panel Finish Panel without Smart Key System and finally the lower panel including the Smart Key System. The Instrument Cluster Finish No. 1 Panel and Combination Meter Assembly need to be removed in that specific order. End the procedure by detaching the connector then removing the clamp before extracting the Turn Signal Flasher Assembly.
Q: How to remove the turn signal flasher assembly on Toyota Corolla?
A: The first step to remove the turn signal flasher assembly starts by taking out the lower instrument panel finish panel assembly. To detach the turn signal flasher assembly first remove it from the junction block.
Q: How to remove the Turn Signal Flasher Assembly on Toyota Tundra?
A: The procedure to remove the Turn Signal Flasher Assembly starts with disassembling the Front Door Scuff Plate LH on Regular Cab or Double Cab models followed by the Cowl Side Trim Board LH. Then remove the Instrument Side Panel LH and Lower Instrument Panel Finish Panel Sub-Assembly LH followed by removing the No. 1 Instrument Panel Safety Pad Insert before disconnecting the Turn Signal Flasher Assembly connector and removing the flasher and nut components. Proceed by disconnecting the Instrument Side Panel LH and then remove the Lower Instrument Panel Finish Panel Sub-Assembly LH. You need to extract the No. 1 Instrument Panel Safety Pad Insert after that step. The Turn Signal Flasher Assembly connector needs disconnecting before removing its nut and flasher.