OEM Toyota FJ Cruiser Crankshaft Position Sensor

Toyota FJ Cruiser Crankshaft Position Sensor Parts Questions & Experts Answers

• Sensor, Crank Position
  90919-A5003
  Q: How to service the crankshaft position sensor on Toyota FJ Cruiser?

  A: The crankshaft position service procedure begins with negative battery terminal disconnection followed by V-bank cover removal together with fan removal. The service process starts with generator assembly removal which allows you to separate the cooler compressor assembly by unbolting the suction hose sub-assembly, disconnecting the cooler compressor assembly connectors and removing four bolts that disconnect it from the V-ribbed belt tensioner assembly. First remove the crankshaft position sensor bolt before disconnecting its connector and then extracting the sensor. To install the crankshaft position sensor first lubricate its O-ring using engine oil before installing it with the bolt and torquing to 10 N.m (102 kgf.cm, 7.4 ft.lbf), followed by connecting the crankshaft position sensor connector. Secure the cooler compressor assembly through 4 bolts while torquing to 24.5 N.m (250 kgf.cm, 18 ft.lbf). Subsequently connect the cooler compressor assembly connector and install the suction hose sub-assembly using the bolt which requires torquing to 7.8 N.m (80 kgf.cm, 69 in.lbf). Start by installing the generator assembly followed by the installation of the fan and completion of negative cable connection to the battery terminal while torquing it to 3.9 N.m (40 kgf.cm, 35 in.lbf) and attaching the V-bank cover.