Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front Right; Front Oxygen Sensor; Sensor, Air Fuel Ratio
Manufacturer Note: RH
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2013-2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
Toyota FJ Cruiser Oxygen Sensor
If you're thinking about purchasing OEM parts for your Toyota FJ Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota FJ Cruiser Oxygen Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to install the heated oxygen sensors on Toyota FJ Cruiser?
A: To install the heated oxygen sensors for the 1GR-FE emission control system, use Special Service Tool 09224-00010 to attach the sensors to the Exhaust Pipe with 44 Nm torque. Connect the sensor connectors and then attach the cable to the negative battery terminal at 3.9 Nm torque.
Q: How to service and repair the Oxygen Sensor on Toyota FJ Cruiser?
A: When servicing the Oxygen Sensor, put on protective gloves and make sure that the Exhaust Pipe has cooled down. Unplug negative battery terminal, remove air fuel ratio sensor by disconnecting No. 2 exhaust manifold stay, disconnect sensor connectors and remove sensors with Special Service Tool, 09224-00010.