How to perform valve clearance service and repair related to the Exhaust Valve and Intake Valve on Toyota Sienna?

The process for valve clearance service requires draining coolant followed by removing the front wiper arm head cap along with right and left front wiper arms and cowl top ventilator louver sub-assembly and wiper link assembly. First remove the No. 1 cowl top to cowl brace inner and the outer front cowl top panel sub-assembly and the right front fender apron seal. Crank the V-bank cover sub-assembly away by using a socket hexagon wrench 5 to unscrew its 3 nuts and finish by removing the cover. Dismantle the emission control valve set by disconnecting two VSV connectors and removing the wire harness clamp while also detachment fuel vapor feed hoses and vacuum hoses prior to unfastening the two nuts securing the emission control valve set. The intake air surge tank requires separation through connector and hose disconnect methods followed by bolt and nut unfastening. Proceed by taking off the radiator hose inlet and ignition coil assembly with the cylinder head cover sub-assembly while detaching the engine wire harness then extracting the nine bolts. You must apply an E6 "Torx" socket wrench to remove the bolts and disconnect the engine wire harness protector from the left cylinder head cover sub-assembly. Use seal packing Part No. 08826-00080 or equivalent on the cylinder head before putting in the cylinder head covers while tightening their bolts according to specified torques. Secure all connections between the ignition coil assembly, intake air surge tank combined with new gasket, emission control valve set during the reinstallation process. Reinstallation occurs of engine components including V-bank cover, cowl top panel, wiper assemblies while you should add coolant and verify the coolant system for potential leaks.

How to perform valve clearance service and repair involving the Exhaust Valve and Intake Valve on Toyota Solara?

You need to remove both RH front wheels and RH front fender apron seal to start the valve clearance service on the 2AZ-FE engine. After disconnecting the engine No.1 cover sub-assembly you can proceed to release the spark plug socket and move on to removing the ventilation hose and ventilation hose No.2. Pull out the bolt from engine wire then detach its harness clamp to take down the cylinder head cover assembly. Uninstall the 8 bolts and 2 nuts along with the cover and its gasket for removal. Use your crankshaft pulley key to align the No.1 cylinder's top dead center position when its timing chain cover mark is at 0. Also normalize the camshaft camshaft timing gear and sprocket rotation with their respective bearing caps No.1 and No.2.

OEM Toyota Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

60 Exhaust Valves found

View related parts
Toyota Exhaust Valve
Part Number: 13715-0D010
$16.36 MSRP: $22.77
You Save: $6.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust; Intake Valve; Valves
- Manufacturer Note: (L)
- Replaces: 13715-22040
Fits the following Toyota Models:
- Corolla | 2000-2008 | CE, LE, S, VE | 4 Cyl 1.8 L GAS
- Matrix | 2003-2008 | Base, XR | 4 Cyl 1.8 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-61030
$27.11 MSRP: $37.74
You Save: $10.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
- Replaces: 13715-60032
Fits the following Toyota Models:
- Land Cruiser | 1984-1987 | Base | 6 Cyl 4.2 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-31091
$27.83 MSRP: $38.74
You Save: $10.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
- Replaces: 13715-31090
Fits the following Toyota Models:
- 4Runner | 2003-2009 | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
- FJ Cruiser | 2007-2009 | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
- Tacoma | 2005-2015 | Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
- Tundra | 2005-2010 | Base, SR5 | 6 Cyl 4.0 L GAS
View More
View related parts
Toyota Valve, Exhaust
Part Number: 13715-0H010
$21.74 MSRP: $30.25
You Save: $8.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Replaces: 13715-28020, 13715-28010
Fits the following Toyota Models:
- Camry | 2002-2011 | Base, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
- Highlander | 2001-2007 | Base | 4 Cyl 2.4 L GAS
- RAV4 | 2001-2005 | Base, L, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, BATTERY EV (EV/BEV)
- Solara | 2004-2006 | SE, SE Sport, SLE | 4 Cyl 2.4 L GAS
View More
View related parts
Toyota Exhaust Valve
Part Number: 13715-65010
$22.10 MSRP: $30.75
You Save: $8.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
Fits the following Toyota Models:
- 4Runner | 1989-1995 | DLX, SR5 | 6 Cyl 3.0 L GAS
- Pickup | 1989-1995 | Base, DLX, SR5 | 6 Cyl 3.0 L GAS
- T100 | 1993-1994 | Base, DX, One-Ton, SR5 | 6 Cyl 3.0 L GAS
View More
View related parts
Toyota Valves
Part Number: 13715-WB001
$13.87 MSRP: $19.31
You Save: $5.44 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust; Intake Valve
Fits the following Toyota Models:
- Yaris | 2019-2020 | L, LE, XLE | 4 Cyl 1.5 L GAS
- Yaris iA | 2017-2018 | Base | 4 Cyl 1.5 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-71010
$21.26 MSRP: $29.59
You Save: $8.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
Fits the following Toyota Models:
- Van | 1984-1989 | Wagon Crg, Wagon DX, Wagon LE | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-15030
$18.75 MSRP: $26.10
You Save: $7.35 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust; Intake Valve; Valves
Fits the following Toyota Models:
- Celica | 1990-1993 | ST | 4 Cyl 1.6 L GAS
- Corolla | 1988-1992 | Base, DLX, DLX All Trac, FX, FX16, FX16 GTS, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-54010
$27.90 MSRP: $38.84
You Save: $10.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
Fits the following Toyota Models:
- Pickup | 1984-1985 | DLX | 4 Cyl 2.4 L DIESEL
View related parts
Toyota Exhaust Valve
Part Number: 13715-35040
$38.66 MSRP: $53.81
You Save: $15.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
Fits the following Toyota Models:
- 4Runner | 1985-1988 | SR5 | 4 Cyl 2.4 L GAS
- Pickup | 1985-1988 | Base Turbo, SR5 Turbo | 4 Cyl 2.4 L GAS
View related parts
Toyota Exhaust Valve
Part Number: SU003-09013
$40.26 MSRP: $56.04
You Save: $15.78 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Exhaust; Valve, Exhaust
Fits the following Toyota Models:
- GR86 | 2022-2023 | 10th Anniversary Special Edition, Base, Premium | 4 Cyl 2.4 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-62040
$32.59 MSRP: $45.36
You Save: $12.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
- Replaces: 13715-62030
Fits the following Toyota Models:
- Camry | 1992-1993 | DLX, DX, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-F0010
$17.08 MSRP: $23.77
You Save: $6.69 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust; Intake Valve; Valves
- Replaces: 13715-25020
Fits the following Toyota Models:
- Avalon | 2019-2022 | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
- Camry | 2018-2022 | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
- Highlander | 2020-2023 | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
- RAV4 | 2019-2022 | Adventure, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, LE, Limited, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
- RAV4 Prime | 2021-2022 | SE, XSE | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
- Sienna | 2021-2023 | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
- Venza | 2021-2023 | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View More
View related parts
Toyota Valve, Exhaust
Part Number: 13715-F0020
$12.06 MSRP: $16.78
You Save: $4.72 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
Fits the following Toyota Models:
- Highlander | 2023 | L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-03020
$18.87 MSRP: $26.26
You Save: $7.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust; Intake Valve; Valves
- Manufacturer Note: (L)
- Replaces: 13715-74080
Fits the following Toyota Models:
- Camry | 1992-2001 | CE, DLX, DX, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS
- Celica | 1992-1999 | GT | 4 Cyl 2.2 L GAS
- MR2 | 1992-1995 | Base | 4 Cyl 2.2 L GAS
- RAV4 | 1996-2000 | Base | 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View More
View related parts
Toyota Exhaust Valve
Part Number: 13715-50060
$18.75 MSRP: $26.10
You Save: $7.35 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
- Manufacturer Note: MARK U,M
Fits the following Toyota Models:
- 4Runner | 2003-2004 | Limited, Sport, SR5 | 8 Cyl 4.7 L GAS
- Land Cruiser | 1998-2004 | Base | 8 Cyl 4.7 L GAS
- Sequoia | 2001-2004 | Limited, SR5 | 8 Cyl 4.7 L GAS
- Tundra | 2000-2004 | Limited, SR5 | 8 Cyl 4.7 L GAS
View More
View related parts
Toyota Valve, Exhaust(For Passenger Side Cylinder Head)
Part Number: 13715-F4010
$16.36 MSRP: $22.77
You Save: $6.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust; Valve, Exhaust(For Driver Side Cylinder Head)
Fits the following Toyota Models:
- Sequoia | 2023 | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
- Tundra | 2022-2023 | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-88602
$19.59 MSRP: $27.26
You Save: $7.67 (29%)
ADD TO CART
Product Specifications
- Other Name: Valve, Exhaust
Fits the following Toyota Models:
- Celica | 2002-2005 | GTS | 4 Cyl 1.8 L GAS
- Corolla | 2005-2006 | XRS | 4 Cyl 1.8 L GAS
- Matrix | 2005-2006 | XRS | 4 Cyl 1.8 L GAS
View More
View related parts
Toyota Exhaust Valve
Part Number: 13715-61040
$40.14 MSRP: $55.87
You Save: $15.73 (29%)
Product Specifications
- Other Name: Valve, Exhaust
Fits the following Toyota Models:
- Land Cruiser | 1988-1992 | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota Exhaust Valve
Part Number: 13715-74020
Product Specifications
- Other Name: Valve, Exhaust
- Replaces: 13715-74060, 13715-74050, 13715-74030
Fits the following Toyota Models:
- Camry | 1991 | Base, DLX, DLX All Trac, LE, LE All Trac | 4 Cyl 2.0 L GAS
- Celica | 1987-1991 | GT, ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
- MR2 | 1991-1992 | Base | 4 Cyl 2.2 L GAS
View More

| Page 1 of 3 |Next >

1-20 of 60 Results

Toyota Exhaust Valve

OEM parts deliver unmatched quality you can rely on. They pass extensive quality control inspections. Toyota produces them to the official factory specifications. This process helps prevent defects and imperfections. So you can get exceptional lifespan and a flawless fit. Need new OEM Toyota Exhaust Valve? You'll love our wide selection of genuine options. Shop in minutes and skip the hunt. Our prices are unbeatable, you'll save time and money. It's easy to shop and find the right piece. Our committed customer service team gives professional help from start to finish. Every part includes a manufacturer's warranty. We ship quickly, your parts will arrive fast at your door.

Toyota Exhaust Valve removes exhaust gases in a short time, maintaining the cylinders clean and those supplying forces focused. Toyota makes lean production cars that cut back on waste, encourage problem-solving speed on the production line, enable the ability to update models faster, and direct the saved money to stone-solid reliability that drivers feel after a few years. Toyota hybrids have now become able to cover longer distances on electric charge, with the recent RAV4 plug-in leading that category, and the TNGA platform also improves handling, reduces the center of gravity, increases crash protection, and allows its teams the freedom of designing more spacious cabins. The company increased durability with fuel-saving, and this has ensured that Toyota grew to be a world force with loyalty among taxi drivers, family members, and adventure seekers. Toyota continues to perfect Hybrid Synergy Drive throughout the models to have owners enjoy a smooth torque without fuel guzzling. The Exhaust Valve closes just in time at the close of the power stroke, forming a direct escape route for the high-pressure combustion gas and avoiding backflow that would deprive horsepower and increase engine temperatures. A sticky Exhaust Valve may instigate coarse idle, misfiring, sluggish acceleration, and uncomfortable gas analyzes. Due to the searing heat and carbon, the Exhaust Valve requires frequent check-ups to ensure that wear is detected before efficiency can decline. A clear Exhaust Valve ensures that the combustion chamber is left to breathe freely, and as such, small engines punch above their weight.

Toyota Exhaust Valve Parts and Q&A

Valve, Exhaust
13715-20020
Q: How to perform valve clearance service and repair related to the Exhaust Valve and Intake Valve on Toyota Sienna?
A:
The process for valve clearance service requires draining coolant followed by removing the front wiper arm head cap along with right and left front wiper arms and cowl top ventilator louver sub-assembly and wiper link assembly. First remove the No. 1 cowl top to cowl brace inner and the outer front cowl top panel sub-assembly and the right front fender apron seal. Crank the V-bank cover sub-assembly away by using a socket hexagon wrench 5 to unscrew its 3 nuts and finish by removing the cover. Dismantle the emission control valve set by disconnecting two VSV connectors and removing the wire harness clamp while also detachment fuel vapor feed hoses and vacuum hoses prior to unfastening the two nuts securing the emission control valve set. The intake air surge tank requires separation through connector and hose disconnect methods followed by bolt and nut unfastening. Proceed by taking off the radiator hose inlet and ignition coil assembly with the cylinder head cover sub-assembly while detaching the engine wire harness then extracting the nine bolts. You must apply an E6 "Torx" socket wrench to remove the bolts and disconnect the engine wire harness protector from the left cylinder head cover sub-assembly. Use seal packing Part No. 08826-00080 or equivalent on the cylinder head before putting in the cylinder head covers while tightening their bolts according to specified torques. Secure all connections between the ignition coil assembly, intake air surge tank combined with new gasket, emission control valve set during the reinstallation process. Reinstallation occurs of engine components including V-bank cover, cowl top panel, wiper assemblies while you should add coolant and verify the coolant system for potential leaks.
Exhaust Valve
13715-28040
Q: How to perform valve clearance service and repair involving the Exhaust Valve and Intake Valve on Toyota Solara?
A:
You need to remove both RH front wheels and RH front fender apron seal to start the valve clearance service on the 2AZ-FE engine. After disconnecting the engine No.1 cover sub-assembly you can proceed to release the spark plug socket and move on to removing the ventilation hose and ventilation hose No.2. Pull out the bolt from engine wire then detach its harness clamp to take down the cylinder head cover assembly. Uninstall the 8 bolts and 2 nuts along with the cover and its gasket for removal. Use your crankshaft pulley key to align the No.1 cylinder's top dead center position when its timing chain cover mark is at 0. Also normalize the camshaft camshaft timing gear and sprocket rotation with their respective bearing caps No.1 and No.2.