Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2018-2024, 1984-2001 Toyota Camry | Base, CE, DLX, DLX All Trac, DX, Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, LE All Trac, SE, SE Nightshade, XLE, XSE | 4 Cyl 1.8 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2024 Toyota Camry | Base, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Toyota Camry Oil Filter
If you're thinking about purchasing OEM parts for your Toyota Camry, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry Oil Filter at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota Camry Oil Filter Parts Questions & Experts Answers
Q: How to replace the oil filter safely and effectively on Toyota Camry?
A: When replacing an oil filter exercise extreme caution to avoid skin contact with used engine oil because it can lead to dryness along with irritation as well as potential harmful effects including skin cancer; follow precautions using protective gear and gloves before washing the affected skin with soap and water or using water-free hand cleaner. Proper disposal of used oil and oil filters must be done at specific sites. Choice to start with draining engine oil involves first unscrewing the oil filler cap before unscrewing the oil drain plug for collecting oil into a receptacle. To proceed with the operation, use Special Service Tool: 09228-06501 to extract the oil filter sub-assembly. The process for oil filter installation begins with cleaning the surface where you will place it then applying clean engine oil to the new filter gasket after which you should screw it in gently and stop tightening when the gasket contacts the seat. Special Service Tool: 09228-06501 helps users tighten the component by performing an additional three-fourths turn. The service requires fresh engine oil that must be measured according to the specific amounts: 3.8 liters (4.0 US qts, 3.3 Imp. qts) for drain and refill with oil filter change, 3.6 liters (3.8 US qts, 3.2 Imp. qts) for drain and refill without oil filter change, and 4.5 liters (4.8 US qts, 4.0 Imp. qts) for dry fill. Put the oil filler cap into place before checking for any oil leakage.