My Garage
Cart
Make sure this part fits

Toyota 04152-YZZA1
Replaceable Element

2005-2024 Toyota 04152YZZA1

Customer Questions & Expert Answers (19)
Toyota 04152-YZZA1 Replaceable Element
Toyota 04152-YZZA1 Replaceable Element
  • Part Description
    Filter Change Maintenance Kit; Engine Oil Filter; Oil Filter
  • Replaces
    04152-0V010, 04152-31110, 04152-31090
  • Manufacturer
    Toyota
Make sure this part fits
$4.27 MSRP: $5.97
You Save: $1.70 (29%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Manufacturer Part Number04152-YZZA1
    Part DescriptionFilter Change Maintenance Kit; Engine Oil Filter; Oil Filter
    Item Dimensions3.5 x 3.4 x 4.5 inches
    Item Weight0.80 Pounds
    ConditionNew
    Replaces04152-0V010, 04152-31110, 04152-31090
    ManufacturerToyota
    SKU04152-YZZA1
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2011-2016 Scion tCBase4 Cyl 2.5 L GAS
    2005-2022 Toyota AvalonBase, Hybrid Limited, Hybrid XLE, Hybrid XLE Plus, Hybrid XLE Premium, Hybrid XLE Touring, Limited, Touring, TRD, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS, XSE, XSE Nightshade4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
    2007-2024 Toyota CamryBase, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, TRD, XLE, XSE4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
    2008-2022 Toyota HighlanderBase, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, L, LE, LE Plus, Limited, Limited Platinum, Platinum, Plus, SE, Sport, XLE, XSE4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
    2006-2018 Toyota RAV4Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
    2007-2020 Toyota SiennaBase, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2016-2023 Toyota TacomaLimited, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport6 Cyl 3.5 L GAS
    2009-2015 Toyota VenzaBase, LE, Limited, XLE4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will this 04152-YZZA1 work for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 04152-YZZA1 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to replace the oil filter on Toyota Camry? Posted by Customer
    A:
    The first step in changing an oil filter on the 2AZ-FE engine demands proper precautions against skin irritation from exposed engine oil and its dangerous pollutants. Wear protective clothing together with gloves before you handle oil and conduct complete skin washing afterwards. The proper location exists for disposal of used oil and filter components. The oil replacement procedure starts with unfastening the oil filler cap followed by the removal of the oil drain plug to allow proper draining into a receptacle. Segment 09228-06501 of Special Service Tool is needed to uninstall the oil filter sub-assembly. Clean the area where you will install the oil filter and apply engine oil to the new oil filter gasket. Begin by hand-tightening the new oil filter onto its seat until the gasket touches the mount and then secure it with Special Service Tool: 09228-06501. Space permitting allows the use of a torque wrench to set the oil filter at 13 Nm (133 kgf-cm, 10ft-lbf); otherwise use a common wrench to tighten it 3/4 turn. The procedure requires cleaning the drain plug before installing a new gasket followed by tightening it to 25 Nm (255 kgf-cm, 18ft-lbf). Then add new oil to the standard capacity and secure the oil filler cap on its place. Inspect for any oil leaks.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to replace the oil filter element while ensuring safety and proper installation on Toyota Avalon? Posted by Customer
    A:
    You must follow safety procedures before removing the 2GR-FE oil filter element because engine oil contact can lead to skin irritation that develops into dermatitis while wearing protective clothing together with gloves. The proper disposal location exists for used oil and filters. A 15 mm hose should be attached to the pipe followed by removal of the oil filter drain plug installed at the oil filter cap. Usage of the pipe with hose must involve placement through the oil filter cap while the O-ring must be positioned on the cap side prior to directing the oil into a container. The tool Special Service Tool: 09228-06501 should be used to remove the oil filter cap after draining the system through its pipe and O-ring removal. Extract the oil filter element and O-ring from the cap using hands to prevent the cap from getting damaged. Apply engine oil to a clean O-ring before installing it on the oil filter cap while preventing twisting from occurring. Clean both installation surfaces as well as the engine-side interior and apply a fresh coat of engine oil to the O-ring before securing the oil filter cap. Secure the cap through Special Service Tool: 09228-06501 so that it reaches 25 Nm (255 kgf-cm, 18 ft. lbs.) while maintaining parts without gaps. The oil filter drain plug should be torques to 13 Nm (127 kgf-cm, 10 ft. lbs.) while watching for O-ring entrapment. Debugging of the system requires you to put engine oil in while testing the connection points between the oil filter cap and drain plug for leakage.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to replace the oil filter on Toyota RAV4? Posted by Customer
    A:
    It is critical before installing a new oil filter to protect your skin from prolonged contact with motor oil because skin irritation together with dermatitis can develop and the oil may contain dangerous impurities. You should wear protective clothing and gloves before conducting the task and wash your skin entirely once you finish. We should take used oil and filters to appropriate disposal areas. Start by pulling off the engine under cover at No. 1 position followed by draining engine oil through unfastening the oil filler cap and oil drain plug while collecting oil into a suitable receptacle. To remove the oil filter sub-assembly you should use Special Service Tool: 09228-06501. Installation begins with cleaning the oil filter seat while applying clean engine oil to the gasket of a new filter before tightening it by hand until the gasket reaches the seat. Use Special Service Tool: 09228-06501 to tighten the oil filter however satellite the gauge allows either hand tightening it 3/4 turn or applying torque to 17.2 Nm (175 kgf-cm, 13 ft. lbs.) or limit the tool. Following the cleaning process install the drained oil plug using a new gasket which needs to be tightened to 40 Nm (408 kgf-cm, 30 ft. lbs.) before adding standard oil amounts and replacing the oil filler cap. Before installation of the No. 1 engine under cover you should inspect for engine oil leaks.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to Properly Replace an Oil Filter on Toyota Venza? Posted by Customer
    A:
    Beginning the oil filter replacement requires draining the engine oil through removal of the oil filler cap followed by the oil pan drain plug and gasket extraction until the oil collects in a container prior to cleaning and installing both parts using a new gasket with 40 Nm (408 kgf-cm, 30 ft-lbf) torque. A 15 mm (0.591 in.) hose should be connected to the pipe prior to extracting the oil filter drain plug and afterward installing the pipe on the oil filter cap. Keep the original O-ring intact when reinstalling the pipe. Place a collecting vessel under the pipe while checking oil drainage from the filter then disconnect the pipe and remove its O-ring. The Special Service Tool: 09228-06501 allows you to detach the oil filter cap while leaving the oil filter bracket clip intact before removing the filter element and O-ring item while avoiding damage to the cap O-ring with manual removal. The first step for installation includes cleaning the cap's interior along with threads and groove where the O-ring rests then applying engine oil to the new O-ring before placing it on the cap followed by positioning a new oil filter element. After applying a second layer of engine oil to the O-ring clean the engine installation surface. The technician should install the oil filter cap while ensuring the O-ring avoids getting trapped. Securely mount the cap with Special Service Tool 09228-06501 by tightening it to 25 Nm (255 kgf-cm, 18 ft-lbf). Add engine oil to both a new drain plug O-ring before installing it on the oil filter cap and put in the oil filter drain plug with torque set at 13 Nm (127 kgf-cm, 10 ft-lbf) as you avoid letting the O-ring get trapped between components. Use standard oil along with the set capacity and proceed to install the oil filler cap. Begin engine operation followed by a leak inspection of serviced areas together with an evaluation of engine oil level.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should you do after the oil is completely drained for the 2007 Toyota Avalon? Posted by Customer
    A:
    Remove the pipe and O-ring, turning the pipe in the direction of the arrow.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What is the first step in the oil filter replacement process for the 2008 Toyota Avalon? Posted by Customer
    A:
    Connect a 15 mm hose to the pipe and remove the oil filter drain plug from the oil filter cap.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What should be done after removing the oil filter cap for the 2009 Toyota Avalon? Posted by Customer
    A:
    Take out the oil filter element and O-ring, ensuring not to use tools for the O-ring to prevent damage.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What is the recommended torque for tightening the oil filter for the 2008 Toyota Camry? Posted by Customer
    A:
    If space allows, use a torque wrench to tighten the oil filter to 13 Nm (133 kgf-cm, 10 ft-lbf); if not, tighten it by hand or with a common wrench for a 3/4 turn.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What is the first step in the oil filter replacement process for the 2007 Toyota Camry? Posted by Customer
    A:
    Begin by draining the engine oil: remove the oil filler cap, then take out the oil drain plug to drain the oil into a container.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What should be done before installing the oil filter drain plug for the 2009 Toyota Highlander? Posted by Customer
    A:
    Apply engine oil to a new drain plug O-ring and remove any dirt from the installation surface.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What is the first step in replacing the oil filter for the 2010 Toyota Camry? Posted by Customer
    A:
    Begin by draining the engine oil: remove the oil filler cap, then take out the oil drain plug and let the oil drain into a container.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    How do you drain the oil from the oil filter cap for the 2008 Toyota Highlander? Posted by Customer
    A:
    Insert the pipe with the hose into the oil filter cap, ensuring the O-ring is installed, and drain the oil into a container.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    How do you secure the oil filter cap for the 2009 Toyota RAV4? Posted by Customer
    A:
    Tighten the oil filter cap using Special Service Tool: 09228-06501 to a torque of 25 Nm (255 kgf-cm, 18 ft-lbf), ensuring it is secure and that the O-ring is not pinched.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    How do you remove the oil filter cap for the 2007 Toyota Sienna? Posted by Customer
    A:
    Use Special Service Tool: 09228-06501 to remove the oil filter cap, then take out the oil filter element and O-ring, ensuring not to use tools for the O-ring to avoid damaging the cap.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What is the torque specification for the oil filter drain plug for the 2008 Toyota Sienna? Posted by Customer
    A:
    Install the oil filter drain plug with a torque of 13 Nm (127 kgf-cm, 10 ft-lbf), ensuring the O-ring is not caught.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    How do you drain the engine oil for the 2007 Toyota RAV4? Posted by Customer
    A:
    Remove the oil filler cap and the oil drain plug, allowing the oil to flow into a container.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What tool is needed to remove the oil filter sub-assembly for the 2008 Toyota RAV4? Posted by Customer
    A:
    Use Special Service Tool: 09228-06501.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    Q:
    What is the torque specification for the oil filter drain plug for the 2009 Toyota Sienna? Posted by Customer
    A:
    Install the oil filter drain plug with a torque of 13 Nm (127 kgf-cm, 10 ft-lbf), ensuring the O-ring does not get caught.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oil Filter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 04152-YZZA1, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 04152-YZZA1 Replaceable Element. It is sometimes referred to as Toyota Oil Filter. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 04152YZZA1 Replaceable Element. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery