How to remove the Camshaft Position Sensor on Toyota 4Runner?

The first step to remove the Camshaft Position Sensor for a 2UZ-FE engine control system requires draining the engine coolant. The first step requires removal of the throttle body cover sub-assembly before handling the fan and generator V belt. After removing the oil cooler pipe you should take out the timing belt cover sub-assembly No. 3 LH. The installation process ends with disconnecting the camshaft position sensor connector and separating the bolt from the stud bolt as well as the camshaft position sensor.

How to install the camshaft position sensor and related components on Toyota 4Runner?

The first step to install the camshaft position sensor requires use of bolt and stud bolt at 7.5 Nm torque (80 kgf-cm, 66 in-lbf). After securing the sensor, reconnect its camshaft position sensor connector. Attempt the installation of the timing belt cover sub-assembly No. 3 LH which must be followed by the oil cooler pipe. The fan and generator V belt need installation at this time. Engine coolant addition must occur while verifying the system for any engine coolant leakage points. Complete the installation by putting in the throttle body cover sub-assembly.

OEM Toyota 4Runner Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Camshaft Position Sensors found

View related parts
Toyota 4Runner Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2005, 1997-2000 Toyota 4Runner | Base, Limited, Sport, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Sensor, Cam Position
Part Number: 90919-A5002
$125.71 MSRP: $177.96
You Save: $52.25 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05036
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota 4Runner | SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Crankshaft Position Sensor
Part Number: 90919-05021
$143.69 MSRP: $203.41
You Save: $59.72 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Crankshaft Sensor; Sensor, Cam Position
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2002 Toyota 4Runner | Base, Limited, SR5 | 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Camshaft Position Sensor
Part Number: 19300-62010
$190.58 MSRP: $272.11
You Save: $81.53 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Cam Position; Engine Camshaft Position Sensor; Sensor, Camshaft Position; Camshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Sensor Assembly, Cam Position
Part Number: 19300-50020
$162.02 MSRP: $229.35
You Save: $67.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Camshaft Position Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota 4Runner | Limited, Sport, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Sensor Assembly, Cam Position
Part Number: 19300-50011
$155.09 MSRP: $219.54
You Save: $64.45 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Engine Camshaft Position Sensor
- Replaces: 19300-50030, 19300-50010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

Toyota 4Runner Camshaft Position Sensor

Choose genuine Camshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Camshaft Position Sensor for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota 4Runner Camshaft Position Sensor Parts and Q&A

Sensor Assembly, Cam Position
19300-50011
Q: How to remove the Camshaft Position Sensor on Toyota 4Runner?
A:
The first step to remove the Camshaft Position Sensor for a 2UZ-FE engine control system requires draining the engine coolant. The first step requires removal of the throttle body cover sub-assembly before handling the fan and generator V belt. After removing the oil cooler pipe you should take out the timing belt cover sub-assembly No. 3 LH. The installation process ends with disconnecting the camshaft position sensor connector and separating the bolt from the stud bolt as well as the camshaft position sensor.
Camshaft Position Sensor, Driver Side
90919-T5005
Q: How to install the camshaft position sensor and related components on Toyota 4Runner?
A:
The first step to install the camshaft position sensor requires use of bolt and stud bolt at 7.5 Nm torque (80 kgf-cm, 66 in-lbf). After securing the sensor, reconnect its camshaft position sensor connector. Attempt the installation of the timing belt cover sub-assembly No. 3 LH which must be followed by the oil cooler pipe. The fan and generator V belt need installation at this time. Engine coolant addition must occur while verifying the system for any engine coolant leakage points. Complete the installation by putting in the throttle body cover sub-assembly.