How to replace the crankshaft position sensor on Toyota 4Runner?

The replacement process of a crankshaft position sensor begins with generator assembly removal and continues with engine under cover assembly rear extraction through breaking the 4 bolts. The cooler compressor assembly requires the removal of one bolt to disconnect the cooler compressor assembly from the suction hose sub-assembly and the cooler compressor assembly connector. After that detach the cooler compressor assembly from the V-ribbed belt tensioner assembly using four bolts. First disconnect the crankshaft position sensor connector before removing the crankshaft position sensor by taking out its mounting bolt. Open the crankshaft position sensor O-ring to the sensor using engine oil before installing it with its bolt at 9.0 N.m (92 kgf.cm, 80 in.lbf) and following by cranking the sensor connector. You should start by reinstalling the cooler compressor assembly through 4 bolts that require a torque of 25 N.m (255 kgf.cm, 18 ft.lbf). Afterward, connect the cooler compressor assembly connector and secure the suction hose sub-assembly through its bolt which needs 8.0 N.m (82 kgf.cm, 71 in.lbf) torque. Reconnect the generator assembly after reinstalling the engine under cover assembly rear through its 4 bolts while torqueing them to 29 N.m (296 kgf.cm, 21 ft.lbf).

OEM Toyota 4Runner Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crankshaft Position Sensors found

View related parts
Toyota 4Runner Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2005, 1997-2000 Toyota 4Runner | Base, Limited, Sport, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Sensor, Crank Position
Part Number: 90919-A5003
$68.48 MSRP: $96.12
You Save: $27.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Crankshaft Position Sensor
Part Number: 90919-05059
$122.19 MSRP: $172.97
You Save: $50.78 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota 4Runner | SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Crankshaft Position Sensor
Part Number: 90919-05020
$125.36 MSRP: $177.46
You Save: $52.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2002 Toyota 4Runner | Base, Limited, SR5 | 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Crankshaft Position Sensor
Part Number: 90919-05016
$153.80 MSRP: $217.71
You Save: $63.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2000 Toyota 4Runner | Base, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Sensor, Crank Position
Part Number: 90919-A5001
$119.49 MSRP: $169.15
You Save: $49.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05035
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 8 Cyl 4.7 L GAS

Toyota 4Runner Crankshaft Position Sensor

If you're thinking about purchasing OEM parts for your Toyota 4Runner, our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner Crankshaft Position Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota 4Runner Crankshaft Position Sensor Parts Questions & Experts Answers

Sensor, Camshaft Position
90080-19014
Q: How to replace the crankshaft position sensor on Toyota 4Runner?
A: The replacement process of a crankshaft position sensor begins with generator assembly removal and continues with engine under cover assembly rear extraction through breaking the 4 bolts. The cooler compressor assembly requires the removal of one bolt to disconnect the cooler compressor assembly from the suction hose sub-assembly and the cooler compressor assembly connector. After that detach the cooler compressor assembly from the V-ribbed belt tensioner assembly using four bolts. First disconnect the crankshaft position sensor connector before removing the crankshaft position sensor by taking out its mounting bolt. Open the crankshaft position sensor O-ring to the sensor using engine oil before installing it with its bolt at 9.0 N.m (92 kgf.cm, 80 in.lbf) and following by cranking the sensor connector. You should start by reinstalling the cooler compressor assembly through 4 bolts that require a torque of 25 N.m (255 kgf.cm, 18 ft.lbf). Afterward, connect the cooler compressor assembly connector and secure the suction hose sub-assembly through its bolt which needs 8.0 N.m (82 kgf.cm, 71 in.lbf) torque. Reconnect the generator assembly after reinstalling the engine under cover assembly rear through its 4 bolts while torqueing them to 29 N.m (296 kgf.cm, 21 ft.lbf).