Q: How to install the No. 5 back door Emblem on Scion tC?
A: To install the No. 5 back door name plate, clean and heat the vehicle surface, then remove old tape and residue. If reusing, clean the name plate and apply new tape. Heat both surfaces again, remove the tape backing, and install the name plate according to measurements.
Q: How to remove the symbol emblem from the back door panel on Scion xB?
A: To take away the emblem, put protective tapes on the area, heat using infrared light to 40-60°C 1-2 min and scrap off the adhesive with a gasket scraper and taped on. Do the same with No. 2 back door name plate.