How to remove and install the back door Emblem on Scion xA?

The process of removing the back door name plate starts with using a heat light to warm the vehicle body and name plate while avoiding excessive heat exposure. First secure the name plate by wrapping it with protective tape yet run a piano wire from the vehicle body to the name plate. Apply wooden blocks to the wire ends as handles before using them to scrape off double-sided tape which fixes the name plate. You should check that the name plate stays intact when you remove it from the vehicle body while also taking prevention measures to avoid body damage. To put in the name plate first clean the vehicle body surface with heat from a heat light. Use white gasoline to eliminate old double-sided tape then remove remaining adhesive traces. You can reuse the name plate by first cleaning it before heating it to remove previous tape and wiping clean all adhesives. Additional heat treatment of both parts allows the removal of the name plate's peeling paper once all foreign material is cleared from the adhesive surface. A final step involves following the specified installation process for the name plate.

OEM Scion xA Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Emblems found

View related parts
Scion xA Emblem
Part Number: 75441-52050
$36.91 MSRP: $51.38
You Save: $14.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Back Door Name; Grille Emblem, Front; Hatch Emblem, Rear; Emblem, Radiator Grille (Or Front Panel); Plate, Front Name
- Replaces: 75441-52080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Scion xA | Base | 4 Cyl 1.5 L GAS
View related parts
Scion xA Emblem
Part Number: 75311-52180
$40.14 MSRP: $55.87
You Save: $15.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille; Grille Emblem, Front; Emblem, Radiator Grille (Or Front Panel)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006 Scion xA | Base | 4 Cyl 1.5 L GAS
View related parts
Scion xA Emblem
Part Number: 75311-52090
$43.61 MSRP: $60.69
You Save: $17.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille; Grille Emblem, Front; Emblem, Radiator Grille (Or Front Panel)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2005 Scion xA | Base | 4 Cyl 1.5 L GAS
View related parts
Scion xA Nameplate, Rear
Part Number: 75442-52200
$34.17 MSRP: $47.55
You Save: $13.38 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Luggage Compartment Door; Hatch Emblem, Rear; Plate, Luggage Compartment Door Name
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Scion xA | Base | 4 Cyl 1.5 L GAS

Scion xA Emblem

Choose genuine Emblem that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Emblem for your Scion xA? Our website is your one-stop destination. We stock an extensive selection of genuine Scion xA parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Scion xA Emblem represents an essential signature of reliability and performance that amounts to a unique brand marker which improves the car's overall identity. The Scion manufacturer logo exists as either a hood ornament part or as a flat trunk and hood attachment that sets the xA apart from rebadged model equivalents. The Scion xA offers its owners outstanding fuel economy with city mileage reaching 27 mpg combined with highway usage at 34 mpg due to its 1.5 L DOHC I4 engine which delivers 108 hp power and allows the vehicle to accelerate from standstill to 60 mph in less than 8.8 seconds. Brand identity stems from the Scion xA Emblem that shows how design changes reflect the use of quality materials during manufacturing although these aspects can impact price level. This vehicle offers a versatile interior space in a compact design that weights 2380 lbs with features including four-wheel disc brakes with anti-lock and traction control systems for safety at competitive prices. The Scion xA Emblem serves two purposes by improving vehicle looks while strongly representing the Scion brand standards for reliability and performance deliverables. The brand xA Emblem shines as a vital automotive market feature because it complements a wide selection of model models while accurately representing the central the automaker brand characteristics.

Scion xA Emblem Parts and Q&A

Emblem
75311-52180
Q: How to remove and install the back door Emblem on Scion xA?
A:
The process of removing the back door name plate starts with using a heat light to warm the vehicle body and name plate while avoiding excessive heat exposure. First secure the name plate by wrapping it with protective tape yet run a piano wire from the vehicle body to the name plate. Apply wooden blocks to the wire ends as handles before using them to scrape off double-sided tape which fixes the name plate. You should check that the name plate stays intact when you remove it from the vehicle body while also taking prevention measures to avoid body damage. To put in the name plate first clean the vehicle body surface with heat from a heat light. Use white gasoline to eliminate old double-sided tape then remove remaining adhesive traces. You can reuse the name plate by first cleaning it before heating it to remove previous tape and wiping clean all adhesives. Additional heat treatment of both parts allows the removal of the name plate's peeling paper once all foreign material is cleared from the adhesive surface. A final step involves following the specified installation process for the name plate.