Toyota 75445-21080
Nameplate, Rear

Start the process by heating with a heat source that sets to normal temperature only and avoiding high heat levels for the body and both plate and emblem. Protective tape should be taped around the nameplate before starting. The following step involves placing a piano wire across the body of the vehicle and the name plate while using wooden blocks as handle attachments to each wire end. Scrape off double-sided tape from the vehicle body using a piano wire while protecting the name plate for reuse if desired together with preventing damage to the body structure.

Take care not to damage the name plate if it is to be reused, and ensure the vehicle body remains undamaged throughout the process.

Take care not to damage the name plate if it is to be reused, and ensure the vehicle body remains undamaged throughout the process.

Begin by cleaning the vehicle body surface and heating it with a heat light to the standard heating temperature.

Clean the vehicle body surface using a heat light to warm it, then remove the double-sided tape and wipe off any adhesive residue with cleaner.

Heat both the vehicle body and name plate again, then remove the peeling paper from the face of the name plate, taking care to keep the exposed adhesive free from foreign matter.

Begin by cleaning the vehicle body surface and heating it with a heat light to the standard heating temperature.

Take care not to damage either the name plate or the vehicle body if you plan to reuse the name plate.