Other Name: Illumination Emblem; Grille Emblem, Front
Position: Front
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2015 Scion xB | Base | 4 Cyl 2.4 L GAS
Scion xB Emblem
If you're thinking about purchasing OEM parts for your Scion xB, our website is your one-stop destination. We stock an extensive selection of genuine Scion xB Emblem at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to install the No. 2 back door name plate and symbol emblem on Scion xB?
A: Before applying the No. 2 back door name plate one must heat and clean the back door panel surface by exposing it to an infrared light at 40 to 60 degrees Celsius (104 to 140 degrees Fahrenheit) for 1 to 2 minutes followed by immediate removal with a shop rag or cloth while still hot. Remove all double-sided tape from the surface until it is completely gone then clean it with non-residue solvent. The new No. 2 back door name plate should get installed above 20 degrees Celsius (68 degrees Fahrenheit) ambient temperature but pre-heating the back door panel and name plate to 20 to 30 degrees Celsius (68 to 86 degrees Fahrenheit) becomes necessary if the temperature falls below this threshold. The symbol emblem demands a second cleaning procedure through heating the remaining double-sided adhesive tape on the back door panel followed by removal while hot then surface cleaning with a non-residue solvent. It is required to position the 2 bosses into the back door panel for symbol emblem installation under temperature conditions exceeding 20 degrees Celsius (68 degrees Fahrenheit) while heating emblem and panel together as needed for proper installation.