×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2010 Scion xB Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Shock Absorbers found
2010 Scion xB Shock Absorber
Part Number: 48530-80420$62.56 MSRP: $87.81You Save: $25.25 (29%)Ships in 1 Business DayProduct Specifications- Other Name: Absorber Assembly, Shock; Rear Suspension Shock Absorber Kit; Strut Shock Kit; Shock Absorber Assembly, Rear Passenger Side & Driver Side; Suspension Shock Absorber
- Manufacturer Note: MARK 48530-12E10
- Item Weight: 4.10 Pounds
- Item Dimensions: 25.6 x 6.6 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80420
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2010 Scion xB Strut, Front Driver Side
Part Number: 48520-80127$118.49 MSRP: $166.32You Save: $47.83 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Absorber Assembly, Shock; Front Left Suspension Strut; Shock Absorber Kit; Set; Strut Shock Kit; Absorber Assembly, Shock, Front Driver Side
- Manufacturer Note: MARK 48520-12C70
- Position: Front Driver Side
- Part Name Code: 48520
- Item Weight: 9.20 Pounds
- Item Dimensions: 27.4 x 8.2 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-80127
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2010 Scion xB Shock Absorber
Looking for affordable OEM 2010 Scion xB Shock Absorber? Explore our comprehensive catalogue of genuine 2010 Scion xB Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Scion xB Shock Absorber Parts Q&A
- Q: How to install the rear shock absorber on 2010 Scion xB?A: Installation of the rear shock absorber begins with placing the rear No. 1 spring bumper on top of the absorber assembly. Set up the jack and wooden block beneath the spring seat of the rear axle beam assembly while keeping the assembly from excessive height increase. The rear shock absorber assembly needs to be bolted temporarily to the rear axle beam assembly using the bolt and nut as you slowly raise the jack to insert the upper part of the rear shock absorber into the installation hole during compression until you reach 20-30 mm (0.78 to 1.18 in.). Proceed to install the rear suspension support following the correct placement as depicted in the illustration. The procedure calls for attaching the socket hexagon wrench (6 mm) to lock the rear shock absorber assembly with correct direction before applying torque of 25 Nm (255 kgf-cm, 18 ft-lbf) to the lock nut. Install the rear wheels according to the torque specifications at 103 Nm (1050 kgf-cm, 76 ft-lbf). Lower the vehicle and bounce it several times for rear suspension stabilization before goed in to the stopper nut and tighten the bolt on the lower side of the rear shock absorber to 90 Nm (918 kgf-cm, 67 ft-lbf). Put on the rear floor service hole cover as the last step.