Other Name: Spring, Coil, Front; Coil Spring, Front; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
Position: Front
Item Weight: 6.20 Pounds
Item Dimensions: 16.1 x 6.9 x 6.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-12D20
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
Base | 4 Cyl 2.4 L GAS
2010 Scion xB Coil Springs
Looking for affordable OEM 2010 Scion xB Coil Springs? Explore our comprehensive catalogue of genuine 2010 Scion xB Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Scion xB Coil Springs Parts Q&A
Q: How to install the rear coil springs and ensure proper alignment and stabilization on 2010 Scion xB?
A: First install the rear coil spring upper insulator onto the spring while verifying that its stopper and upper end measure 10 mm (0.39 in.) or less apart. You should first mount the rear coil spring lower insulator before installing the rear coil spring onto the rear axle beam and placing its identification mark at the specified location. The rear shock absorber assembly should receive temporary tightening modifications while performing the same procedures on the right-hand side. The connection of skid control sensor wires should be done the same way for both LH and RH sides. The installation process begins with rear wheels followed by the rear floor side member brace sub-assembly before you cover the rear floor side member with both RH and LH components. After suspension stabilization apply a full tension to both rear axle beam assemblies along with rear shock absorber assemblies for both sides. The inspection of rear wheel alignment and observation of VSC sensor signal should conclude the repair process. Special Service Tool: 09950-00010.