How to install the rear door lock on 2010 Scion xB?

The first step for rear door lock installation involves replacing the door lock connecting part packing with new material unless reusing a previously removed door lock while maintaining a clean surface condition without grease or dirt on the packing material. For the front door lock apply MP grease to all sliding and rotating components followed by installing the rear door inside locking cable which requires pressing in the three claws to secure the cover. The next stage requires installation of the rear door lock remote control cable during which you should engage the claw followed by closing the cover. A new door lock wire harness seal should be positioned on the rear door lock before placing it into the rear door outside handle release plate and fixing it to the rear door panel while ensuring the rear door outside handle frames lock into place. Place Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent on screws' threads before tightening the rear door lock with 3 screws using a "TORX" T30 socket wrench to 5.0 Nm (51 kgf-cm, 44 in-lbf). Connect the connector, then proceed to install the rear door window regulator sub-assembly, rear door glass sub-assembly, rear door quarter window Weather Strip, rear door window division bar sub-assembly, rear door glass run, rear door belt moulding assembly, rear door Weather Strip, rear door check assembly, rear door service hole cover, rear door trim bracket, rear door glass inner Weather Strip, rear door trim board sub-assembly, rear door inside handle bezel, and rear door armrest base upper panel. Attach the cable to the negative battery terminal while tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf).

OEM 2010 Scion xB Door Lock

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Locks found

View related parts
2010 Scion xB Gate Lock, Rear
Part Number: 69350-28151
$174.01 MSRP: $246.33
You Save: $72.32 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Manufacturer Note: KOREA SPEC
- Position: Rear
- Replaces: 69350-28150
- Part Name Code: 69350P
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69350-28151
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2010 Scion xB Lock Actuator, Driver Side
Part Number: 69040-0C050
$254.66 MSRP: $363.60
You Save: $108.94 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69040-06180
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2010 Scion xB Lock Actuator, Driver Side
Part Number: 69060-06100
$253.96 MSRP: $362.60
You Save: $108.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Left; Door Latch Assembly, Rear Left; Lock Assembly; Rear Door W/Motor, Driver Side; Door Lock Actuator Motor.
- Position: Driver Side
- Replaces: 69060-33120
- Part Name Code: 69060A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69060-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2010 Scion xB Lock Actuator, Passenger Side
Part Number: 69050-06100
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Rear Door W; Door Lock Actuator Motor, Rear Right; Door Latch Assembly, Rear Right; Lock Assembly; Rear Door W/Motor, Passenger Side; Door Lock Actuator Motor.
- Position: Passenger Side
- Replaces: 69050-33120
- Part Name Code: 69050A
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69050-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2010 Scion xB Lock Actuator, Passenger Side
Part Number: 69030-42230
$248.02 MSRP: $354.11
You Save: $106.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor; Door Latch Assembly.
- Manufacturer Note: WIRELESS DOOR LOCK-WITH(PANIC BUTTON)&DOOR OUTSIDE HANDLE-BODY COLOR,W/O(PASSENGER KEY CYLINDER)&POWER WINDOW-WITH(DRIVER ONE TOUCH DOWN)
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-42230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2010 Scion xB Door Lock

Looking for affordable OEM 2010 Scion xB Door Lock? Explore our comprehensive catalogue of genuine 2010 Scion xB Door Lock. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xB Parts Questions & Experts Answers

Q: How to install the rear door lock on 2010 Scion xB?
A: The first step for rear door lock installation involves replacing the door lock connecting part packing with new material unless reusing a previously removed door lock while maintaining a clean surface condition without grease or dirt on the packing material. For the front door lock apply MP grease to all sliding and rotating components followed by installing the rear door inside locking cable which requires pressing in the three claws to secure the cover. The next stage requires installation of the rear door lock remote control cable during which you should engage the claw followed by closing the cover. A new door lock wire harness seal should be positioned on the rear door lock before placing it into the rear door outside handle release plate and fixing it to the rear door panel while ensuring the rear door outside handle frames lock into place. Place Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent on screws' threads before tightening the rear door lock with 3 screws using a "TORX" T30 socket wrench to 5.0 Nm (51 kgf-cm, 44 in-lbf). Connect the connector, then proceed to install the rear door window regulator sub-assembly, rear door glass sub-assembly, rear door quarter window Weather Strip, rear door window division bar sub-assembly, rear door glass run, rear door belt moulding assembly, rear door Weather Strip, rear door check assembly, rear door service hole cover, rear door trim bracket, rear door glass inner Weather Strip, rear door trim board sub-assembly, rear door inside handle bezel, and rear door armrest base upper panel. Attach the cable to the negative battery terminal while tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf).