How to install the Knock Sensor on 2009 Toyota Venza?

Install the 1AR-FE engine control Knock Sensor by putting the bolt at an angle according to the illustration while tightening it to 20 Nm (204 kgf-cm or 15 ft-lbf). The sensor installation angle needs to be between 7 degrees above level position and 10 degrees below it from horizontal orientation. The sensor connector needs to be attached after the sensor is properly installed. Mount the intake manifold after finishing the intake sensor connection.

OEM 2009 Toyota Venza Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2009 Toyota Venza Knock Sensor
Part Number: 89615-06010
$138.05 MSRP: $195.42
You Save: $57.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
- Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
- Part Name Code: 89615
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 1.9 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89615-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Venza Knock Sensor

Looking for affordable OEM 2009 Toyota Venza Knock Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Venza Knock Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Venza Parts Questions & Experts Answers

Q: How to install the Knock Sensor on 2009 Toyota Venza?
A: Install the 1AR-FE engine control Knock Sensor by putting the bolt at an angle according to the illustration while tightening it to 20 Nm (204 kgf-cm or 15 ft-lbf). The sensor installation angle needs to be between 7 degrees above level position and 10 degrees below it from horizontal orientation. The sensor connector needs to be attached after the sensor is properly installed. Mount the intake manifold after finishing the intake sensor connection.

Related 2009 Toyota Venza Parts

Alternate Year Models

2010 Toyota Venza Knock Sensor