How to remove the Camshaft Position Sensor on 2009 Toyota Venza?

The first step to remove the Camshaft Position Sensor requires removing the No. 1 Engine Cover Sub-assembly. Remove the Exhaust Side sensor by disconnecting its connector then removing the bolt and sensor. First disconnect the sensor connector on the Intake Side before removing the sensor bolt and sensor.

OEM 2009 Toyota Venza Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2009 Toyota Venza Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Part Name Code: 11101E
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 3
- SKU: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Venza Camshaft Position Sensor

Looking for affordable OEM 2009 Toyota Venza Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Venza Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Venza Parts Questions & Experts Answers

Q: How to remove the Camshaft Position Sensor on 2009 Toyota Venza?
A: The first step to remove the Camshaft Position Sensor requires removing the No. 1 Engine Cover Sub-assembly. Remove the Exhaust Side sensor by disconnecting its connector then removing the bolt and sensor. First disconnect the sensor connector on the Intake Side before removing the sensor bolt and sensor.