My Garage
Cart

OEM Toyota Venza Knock Sensor

Engine Knock Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

  • Toyota Venza Knock Sensor Diagram - 89615-06010
    View related parts

    Toyota Venza Knock Sensor

    Part Number: 89615-06010
    $138.05 MSRP: $195.42
    You Save: $57.37 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
    • Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following Vehicles:
    • 2021-2023, 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Venza Knock Sensor

Choose genuine Knock Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Knock Sensor for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Knock Sensor is an important part which plays a major role in the efficiency and dependability vehicles of Toyota Venza. This high-complexity sensor is designed to pick signals relative to engine knock - a phenomenon that might result from incorrect ignition - and relay the information with the PCM. Due to real-time adjustment of ignition timing, Knock Sensor also helps in maintaining the high efficiency with long durability of cars and determine fuel qualities and varying environmental conditions. This feature proves to be highly useful for ensuring the reliability and longevity of an engine, and is a feature that sets automobiles in the market apart. The Toyota Venza automobile with safety and comfort as its key selling points has been renowned among automobiles since it was first manufactured in 2008 with the Knock Sensor being vital in the first Gen Toyota Venza automobiles manufactured between 2008 and 2015 and other updated versions. Thus, the Knock Sensor comes with Piezoelectric Design that enables the monitoring of the vibration at the cylinder level for optimal performance. This concept of reliability and performance of optimization make Toyota Venza a prestigious car amongst the rivals and in the same scale complemented by the award Achieved from the IIHS of Top Safety Pick award. In conclusion, the Knock Sensor is very important since it while making the car more efficient and safe to drive, it should be a compulsory feature for the Toyota Venza.

Toyota Venza Knock Sensor Parts and Q&A

  • Q: How to install the Knock Sensor on Toyota Venza?
    A:
    Install the 1AR-FE engine control Knock Sensor by putting the bolt at an angle according to the illustration while tightening it to 20 Nm (204 kgf-cm or 15 ft-lbf). The sensor installation angle needs to be between 7 degrees above level position and 10 degrees below it from horizontal orientation. The sensor connector needs to be attached after the sensor is properly installed. Mount the Intake Manifold after finishing the intake sensor connection.

Related Toyota Venza Parts