OEM Toyota Venza Neutral Safety Switch

Toyota Venza Neutral Safety Switch Parts Questions & Experts Answers

• Neutral Safety Switch
  84540-07010
  Q: How to remove the Neutral Safety Switch from the U760F AUTOMATIC TRANSMISSION / TRANSAXLE on Toyota Venza?

  A: The process to detach the Neutral Safety Switch from the U760F AUTOMATIC TRANSMISSION / TRANSAXLE begins with COOL AIR INTAKE DUCT SEAL removal followed by INLET AIR CLEANER ASSEMBLY then AIR CLEANER CAP SUB-ASSEMBLY followed by AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY then AIR CLEANER CASE SUB-ASSEMBLY. Start by detaching the AIR CLEANER BRACKET through wire harness clamp separation and by removing the two bolts. Removed first the transmission control cable bracket clip then dismounted both the control shaft lever and nut and transmission control cable from the control shaft lever. Unplug the connection from the park/neutral position switch after which remove the nut alongside washer and control shaft lever from the control shaft. End the process by taking out the two bolts that fasten the park/neutral position switch to the control shaft. The installation section of the control shaft requires cleaning from any rust or dirt before switch removal. Move the switch directly along the shaft to stop plate spring deformation which will lead to installation problems with the park/neutral position switch.