How to install the Crankshaft Position Sensor on Toyota Venza?

To install the Crankshaft Position Sensor for the 1AR-FE engine, coat the O-ring with engine oil and check for damage. Apply adhesive to the bolt threads, install the sensor, tighten to 10 Nm, connect the sensor, check for oil leaks, and install the Front Fender Apron Seal RH.

How to remove the Crankshaft Position Sensor on Toyota Venza?

To detach the Crankshaft Position Sensor from the 1AR-FE engine control, start by taking off the right front fender apron seal. Then, disconnect the sensor connector, followed by removing the bolt and the sensor.

OEM Toyota Venza Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshaft Position Sensors found

View related parts
Toyota Venza Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Crankshaft Position Sensor
Part Number: 90919-A5004
$99.41 MSRP: $139.54
You Save: $40.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Sensor, Crankshaft Pulse; Crankshaft Sensor; Camshaft Position Sensor
- Replaces: 90919-05070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, XLE | 4 Cyl 2.7 L GAS
View related parts
Toyota Venza Sensor, Crank Position
Part Number: 90919-A5003
$72.15 MSRP: $101.28
You Save: $29.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Sensor, Camshaft Position
Part Number: 90919-A5007
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Sensor, Crank Position
Part Number: 90919-A5006
$102.02 MSRP: $143.20
You Save: $41.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Replaces: 90919-05095
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

Toyota Venza Crankshaft Position Sensor

If you're thinking about purchasing OEM parts for your Toyota Venza, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza Crankshaft Position Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Venza Crankshaft Position Sensor Parts and Q&A

Sensor, Crank Position
90919-A5003
Q: How to install the Crankshaft Position Sensor on Toyota Venza?
A: To install the Crankshaft Position Sensor for the 1AR-FE engine, coat the O-ring with engine oil and check for damage. Apply adhesive to the bolt threads, install the sensor, tighten to 10 Nm, connect the sensor, check for oil leaks, and install the Front Fender Apron Seal RH.
Crankshaft Position Sensor
90919-A5004
Q: How to remove the Crankshaft Position Sensor on Toyota Venza?
A: To detach the Crankshaft Position Sensor from the 1AR-FE engine control, start by taking off the right front fender apron seal. Then, disconnect the sensor connector, followed by removing the bolt and the sensor.