OEM Toyota Venza Ignition Switch

Toyota Venza Ignition Switch Parts and Q&A

• Position Sensor
  84052-71010
  Q: How to Remove the Ignition Switch on Toyota Venza?

  A:

  Begin the ignition switch removal process by disconnecting the negative battery terminal cable and keeping in mind that certain systems need initialization after reconnecting the cable. The first step includes taking off the upper console panel sub-assembly either without seat heater system or with seat heater system and then removing the No. 2 console box carpet alongside the console box assembly. The service technician needs to take out the air conditioning control assembly together with the front door scuff plate LH and the cowl side trim sub-assembly LH. The technician should uninstall the lower No. 1 instrument panel finish panel as well as the front door scuff plate RH and cowl side trim sub-assembly RH. The technician must begin by taking out the No. 2 instrument panel under cover sub-assembly followed by the lower instrument panel sub-assembly. The technician must first eliminate the shift lever knob sub-assembly together with the console box sub-assembly followed by removal of lower steering column cover and upper steering column cover. First disconnect the connector then you must push out and remove the lower instrument panel finish panel assembly and the instrument cluster finish panel by clearing their four claws. The removal process ends with removing the engine switch by detaching its two claws.
• Ignition Switch
  84450-12200
  Q: How to install the ignition switch on Toyota Venza?

  A:

  The installation of the ignition switch requires connecting the connector afterward securing the connector clamp to the ignition switch then using two screws for its final fixation. You need to use the 2 screws for securing the ignition switch in its place. Follow this step by placing on the upper steering column cover followed by the lower steering column cover installation.