What are the safety precautions and procedures for servicing and disposing of SRS parts and Airbag on Toyota Venza?

The Air Bag sensors consist of the front Air Bag sensor together with the door side Air Bag sensor and side Air Bag sensor and rear Air Bag sensor but SRS parts refer to the combination of steering pad with driver side knee Air Bag assembly and front passenger Air Bag assembly and curtain shield Air Bag assembly plus front seat side Air Bag assembly and front seat outer belt pretensioner. Every step in the proper service order must be followed to avoid accidental SRS deployment that could cause dangerous consequences while also ensuring correct SRS functioning upon deployment necessity. DTCs should be checked first and you must wait 90 seconds past ignition cutoff and battery disconnection to prevent unintended SRS part activation. Write down all memory information from different systems before disconnecting the battery because it will erase their stored data. The diagnostic process demands an ohmmeter with voltmeter features that exhibit 10 kOhms of minimum impedance standards while respecting information labels that accompany SRS parts. SRS parts must not be subjected to disassembly or repair attempts because these require immediate replacement of dropped or damaged parts with fresh units. Control the temperature exposure and flame contact of SRS components yet check these parts after all crashes even if Air Bags stay in their storage position. SRS parts should never receive any substance applications and must always stay separated from high temperatures along with humidity and electrical noise when they are deployed or stored. SRS parts need to be deployed through the proper tool at an outdoor space where people must stay at least 10 m (32.8 ft.) from the area while discharging static electricity before dealing with the parts. SRS parts must cool for thirty minutes after deployment then workers must seal them in a plastic bag while using gloves along with safety glasses before washing their hands. Maintain the Air Bag deployment side pointing up during handling before you touch the area surrounding the front seat outer belt retractor. The battery should remain disconnected while working with the spiral cable and it should not be rotated when attached and should always be kept in the neutral position during installation. All sensors must be replaced in groups whenever SRS parts become deployed for service. Pay special attention to yellow wire harnesses together with their specific connectors. All SRS components must leave the repair area before electric welder use because deployment could occur accidentally and SRS components need examination following car crashes or SRS DTC appearances.

OEM Toyota Venza Airbag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Airbags found

View related parts
Toyota Venza Side Impact Inflator Module, Driver Side Part Number: 73920-0R080
$384.64 MSRP: $563.69
You Save: $179.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Front Seat; Seat Air Bag, Front Left Upper; Front Seat Air Bag; Air Bag Assembly, Front Seat, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Air Bag Assembly, Front Seat, Passenger Side Part Number: 73910-0R080
$384.64 MSRP: $563.69
You Save: $179.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Front Seat
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Passenger Air Bag, Front Passenger Side Part Number: 73960-48120
$601.65 MSRP: $881.73
You Save: $280.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Front Right; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Inflator Curtain, Driver Side Part Number: 62180-0T011
$604.38 MSRP: $885.72
You Save: $281.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Left; Head Air Bag; Air Bag Assembly, Curtain Shield, Driver Side
- Position: Driver Side
- Replaces: 62180-0T010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Inflator Curtain, Passenger Side Part Number: 62170-0T011
$604.38 MSRP: $885.72
You Save: $281.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Right; Head Air Bag; Air Bag Assembly, Curtain Shield, Passenger Side
- Position: Passenger Side
- Replaces: 62170-0T010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Passenger Air Bag, Upper Part Number: 73960-0T020
$649.66 MSRP: $952.09
You Save: $302.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
- Position: Upper
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Inflator Curtain, Passenger Side Part Number: 62170-48110
$694.84 MSRP: $1018.29
You Save: $323.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Front Right; Head Air Bag; Air Bag Assembly, Curtain Shield, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Passenger Air Bag, Upper Part Number: 73960-0T010
$751.70 MSRP: $1101.62
You Save: $349.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
- Manufacturer Note: SRS AIR BAG-B + CUT OFF SWITCH
- Position: Upper
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Knee Inflator Module, Gray Part Number: 73900-0T010-B0
$786.88 MSRP: $1153.19
You Save: $366.31 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Knee Air Bag; Air Bag Assembly, Instrument Panel, Lower
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Knee Inflator Module Part Number: 73900-48110-C0
$807.54 MSRP: $1183.46
You Save: $375.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag; Knee Air Bag; Air Bag Assembly, Instrument Panel, Lower
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Knee Inflator Module Part Number: 73900-0T010-A0
$822.85 MSRP: $1205.90
You Save: $383.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Knee Air Bag; Air Bag Assembly, Instrument Panel, Lower
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Knee Air Bag, Black Part Number: 73900-0T010-C0
$865.54 MSRP: $1268.46
You Save: $402.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Instrument Panel; Air Bag Assembly, Instrument Panel, Lower
- Manufacturer Note: BLACK,TRIM2#
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Air Bag Assembly, Front Seat Cushion, Passenger Side Part Number: 739F0-F6030
$306.85 MSRP: $438.11
You Save: $131.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Front Seat
- Manufacturer Note: *COS,W(STEERING HEATER&REAR SEAT HEATER)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Side Impact Inflator Module, Passenger Side Part Number: 739F0-0R020
$306.85 MSRP: $438.11
You Save: $131.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Front Seat; Seat Air Bag, Front Right Lower; Front Seat Air Bag; Air Bag Assembly, Front Seat Cushion, Passenger Side
- Position: Passenger Side
- Replaces: 739F0-42010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Inflator Module, Passenger Side Part Number: 739F0-12030
$306.50 MSRP: $437.62
You Save: $131.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Front Seat; Seat Air Bag, Front Right Lower; Side Impact Inflator Module; Front Seat Air Bag; Pelvic Air Bag; Air Bag Assembly, Front Seat Cushion, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Side Impact Inflator Module, Passenger Side Part Number: 73910-0T010
$364.78 MSRP: $534.59
You Save: $169.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Front Seat; Seat Air Bag, Front Right; Front Seat Air Bag; Air Bag Assembly, Front Seat, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Side Impact Inflator Module, Driver Side Part Number: 73920-0T010
$384.64 MSRP: $563.69
You Save: $179.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Assembly, Front Seat; Seat Air Bag, Front Left; Front Seat Air Bag; Air Bag Assembly, Front Seat, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Inflator Curtain, Driver Side Part Number: 62180-48110
$694.84 MSRP: $1018.29
You Save: $323.45 (32%)
Product Specifications
- Other Name: Air Bag Assembly, Curtain Shield; Curtain Air Bag, Front Left; Head Air Bag; Air Bag Assembly, Curtain Shield, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

Toyota Venza Airbag

Choose genuine Airbag that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Airbag for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Venza Airbag is set to inflate quickly, offering a buffer to the occupant, causing them to not impact the hard interior. The Airbag system in the Toyota Venza cabin comprises an Airbag module in the steering wheel and another one in the dashboard as per requirement. The system design has been done so that it can work together and as a supplement to seat belt restrainers fitted in the vehicle. The Airbag module contains a flexible fabric bag, inflation module, impact sensor, diagnostic unit, wiring harness, reserve power supply, coil connector, and indicator lamp. Sensors detect whether a collision is minor, moderate, or severe when a vehicle collides with another vehicle, a wall, a tree, etc. This data on collision type, angle, and severity is delivered to the electronic controller. The controller makes the decision in milliseconds whether to fire a pyrotechnic charge. This charge fills the bag, and after the energy has been absorbed, this charge allows the bag to start deflating. Each Toyota Venza relies on this single-use Airbag deployment process. The light on the instrument cluster briefly glows at every start-up for circuitry self-test. In case the ignition is off or the battery is disconnected, the Toyota Venza system keeps a ready reserve charge which ensures that the Airbag is always ready to operate when the car receives a qualifying impact.

Toyota Venza Airbag Parts and Q&A

Inflator Curtain, Passenger Side
62170-0T011
Q: What are the safety precautions and procedures for servicing and disposing of SRS parts and Airbag on Toyota Venza?
A:
The Air Bag Sensors consist of the front Air Bag sensor together with the door side Air Bag sensor and side Air Bag sensor and rear Air Bag sensor but SRS parts refer to the combination of steering pad with driver side knee Air Bag assembly and front passenger Air Bag assembly and curtain shield Air Bag assembly plus front seat side Air Bag assembly and front seat outer belt pretensioner. Every step in the proper service order must be followed to avoid accidental SRS deployment that could cause dangerous consequences while also ensuring correct SRS functioning upon deployment necessity. DTCs should be checked first and you must wait 90 seconds past ignition cutoff and battery disconnection to prevent unintended SRS part activation. Write down all memory information from different systems before disconnecting the battery because it will erase their stored data. The diagnostic process demands an ohmmeter with voltmeter features that exhibit 10 kOhms of minimum impedance standards while respecting information labels that accompany SRS parts. SRS parts must not be subjected to disassembly or repair attempts because these require immediate replacement of dropped or damaged parts with fresh units. Control the temperature exposure and flame contact of SRS components yet check these parts after all crashes even if Air Bags stay in their storage position. SRS parts should never receive any substance applications and must always stay separated from high temperatures along with humidity and electrical noise when they are deployed or stored. SRS parts need to be deployed through the proper tool at an outdoor space where people must stay at least 10 m (32.8 ft.) from the area while discharging static electricity before dealing with the parts. SRS parts must cool for thirty minutes after deployment then workers must seal them in a plastic bag while using gloves along with safety glasses before washing their hands. Maintain the Air Bag deployment side pointing up during handling before you touch the area surrounding the front seat outer belt retractor. The battery should remain disconnected while working with the spiral cable and it should not be rotated when attached and should always be kept in the neutral position during installation. All sensors must be replaced in groups whenever SRS parts become deployed for service. Pay special attention to yellow wire harnesses together with their specific connectors. All SRS components must leave the repair area before electric welder use because deployment could occur accidentally and SRS components need examination following car crashes or SRS DTC appearances.