How to remove the Main Body Control Module (Driver Side Junction Block Assembly) on Toyota Venza?

The removal process of the Main Body ECU (Driver Side Junction Block Assembly) starts with disassembly of the upper instrument panel. Begin by detachment of four connectors followed by unfastening the two claws before disconnecting connector [A]. The removal process begins with disconnecting the first set of 3 connectors before moving on to the second stage of 3 connector removals according to the diagram. Unplug connector [A] first before disconnecting the other connectors along with their 2 additional counterparts. After removing the 3 nuts, you can disengage the 2 claws and disconnect connector [A] a second time. The main body ECU (Driver Side Junction Block Assembly) and its accompanying 5 relays can be detached after disconnecting all the 4 connectors.

How to install the Main Body Control Module and Upper Instrument Panel on Toyota Venza?

Installation of the Main Body ECU (Driver Side Junction Block Assembly) requires first installing five relays followed by connection of four connectors. Install connector [A] according to the illustration by fitting it securely into all positions. Secure the Main Body ECU by attaching the 3 nuts while using the engagement process on the 2 claws. Secure the connections for the 2 first then proceed to engage connector [A] with identical safety measures. Alternative installation should proceed by securing all remaining connectors while verifying their correct engagement. Conclude the setup by connecting the three connectors according to the diagram then use the two claws to lock connector [A] before safely installing the last four connectors. You must perform the Upper Instrument Panel Sub-assembly installation according to proper procedure.

OEM Toyota Venza Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Body Control Modules found

View related parts
Toyota Venza Body Control Module
Part Number: 89221-48810
$738.08 MSRP: $1081.66
You Save: $343.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Multiplex; Computer; Computer, Multiplex Network Body
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Venza | LE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Body Control Module
Part Number: 89221-48800
$738.08 MSRP: $1081.66
You Save: $343.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Multiplex; Computer; Computer, Multiplex Network Body
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Body Control Module
Part Number: 89221-48620
$793.01 MSRP: $1162.17
You Save: $369.16 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Multiplex; Computer; Computer, Multiplex Network Body
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | LE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Junction Block, Driver Side
Part Number: 82730-0T063
$833.42 MSRP: $1221.39
You Save: $387.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Block Assembly, Driver Side Junction; Junction Boxes; Fuse Box
- Position: Driver Side
- Replaces: 82730-0T062
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2012 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Control Module
Part Number: 89780-0T020
$360.12 MSRP: $527.77
You Save: $167.65 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Transmission; Anti-Theft Alarm Control Unit; Body Control Module; Computer; Computer Assembly, Transponder Key
- Manufacturer Note: WITH(SMART KEY)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Control Module
Part Number: 89780-0T010
$404.76 MSRP: $593.18
You Save: $188.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Transmission; Anti-Theft Alarm Control Unit; Body Control Module; Computer; Computer Assembly, Transponder Key
- Manufacturer Note: WITH(SMART KEY)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009 Toyota Venza | Base | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Body Control Module
Part Number: 89221-48610
$672.02 MSRP: $984.86
You Save: $312.84 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Multiplex; Computer; Computer, Multiplex Network Body
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Junction Block, Driver Side
Part Number: 82730-0T150
$732.18 MSRP: $1073.01
You Save: $340.83 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Block Assembly, Driver Side Junction; Junction Boxes; Fuse Box
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Junction Block, Driver Side
Part Number: 82730-0T130
$732.13 MSRP: $1072.95
You Save: $340.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Block Assembly, Driver Side Junction; Junction Boxes; Fuse Box
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Junction Block, Driver Side
Part Number: 82730-0T040
$818.44 MSRP: $1199.43
You Save: $380.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Block Assembly, Driver Side Junction; Junction Boxes; Fuse Box
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2010 Toyota Venza | Base | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Venza Body Control Module

Choose genuine Body Control Module that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Body Control Module for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Venza Body Control Module (BCM) is a profound part of the car indicating Toyota's level of seriousness in delivering only the premier to its clients. BCM is the central computer of Toyota Venza and controls most electrical wires of the vehicle's body functioning including power windows, mirrors, air conditioning and door locks. This integration not only makes the actual driving to become more enjoyable but it plays a very big role in making the Toyota Venza to be safe and efficient. The BCM interacts with other computers within the car using the vehicle bus and employs the use of load drivers to turn on relays for things like locking doors and regulating lighting. This efficient and very communicated network guarantees the proper functioning of the Toyota Venza; this translates into the high quality of the brand. As to the compatibility, this Body Control Module can be linked with the different models of the Venza cars; it shall be noted that the Board Control Module can also be programmed in different ways where appropriate while the advanced features shall be provided to all drivers. However, the Toyota Venza has also being praised for its safety some of which are; Top Safety pick by the Insurance Institute for Highway Safety (IIHS) in different years. Thus, the car market shows a remarkable and unique vehicle known as the Toyota venza where the body control module does great importance in improving the convenience and efficient hence exercising a significant importance in the construction of the Toyota. The Toyota Venza Body Control Module today remains as the perfect example of a well-built, reliable and performing automobile system.

Toyota Venza Body Control Module Parts and Q&A

Control Module
89780-0T010
Q: How to remove the Main Body Control Module (Driver Side Junction Block Assembly) on Toyota Venza?
A:
The removal process of the Main Body ECU (Driver Side Junction Block Assembly) starts with disassembly of the upper instrument panel. Begin by detachment of four connectors followed by unfastening the two claws before disconnecting connector [A]. The removal process begins with disconnecting the first set of 3 connectors before moving on to the second stage of 3 connector removals according to the diagram. Unplug connector [A] first before disconnecting the other connectors along with their 2 additional counterparts. After removing the 3 nuts, you can disengage the 2 claws and disconnect connector [A] a second time. The main body ECU (Driver Side Junction Block Assembly) and its accompanying 5 relays can be detached after disconnecting all the 4 connectors.
Junction Block, Driver Side
82730-0T040
Q: How to install the Main Body Control Module and Upper Instrument Panel on Toyota Venza?
A:
Installation of the Main Body ECU (Driver Side Junction Block Assembly) requires first installing five relays followed by connection of four connectors. Install connector [A] according to the illustration by fitting it securely into all positions. Secure the Main Body ECU by attaching the 3 nuts while using the engagement process on the 2 claws. Secure the connections for the 2 first then proceed to engage connector [A] with identical safety measures. Alternative installation should proceed by securing all remaining connectors while verifying their correct engagement. Conclude the setup by connecting the three connectors according to the diagram then use the two claws to lock connector [A] before safely installing the last four connectors. You must perform the Upper Instrument Panel Sub-assembly installation according to proper procedure.

Related Toyota Venza Parts

Browse Toyota Venza Body Control Module by Years

2023 2022 2021 2015 2014 2013 2012 2011 2010 2009