×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2009 Toyota Prius ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Control Modules found
2009 Toyota Prius Modulator Valve
Part Number: 44500-47141$1383.33 MSRP: $1741.34You Save: $358.01 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44500-47140
- Item Weight: 17.60 Pounds
- Item Dimensions: 12.1 x 10.3 x 9.2 inches
- Condition: New
- SKU: 44500-47141
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Prius Control Module
Part Number: 89540-47130$2379.63 MSRP: $2995.49You Save: $615.86 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Computer Assembly, Skid; ABS Control Module; Computer; Computer Assembly, Skid Control
- Replaces: 89540-47100, 89540-47080
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.0 x 6.4 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-47130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Prius ABS Control Module
Looking for affordable OEM 2009 Toyota Prius ABS Control Module? Explore our comprehensive catalogue of genuine 2009 Toyota Prius ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Prius ABS Control Module Parts Q&A
- Q: How to Properly Install the ABS Control Module on 2009 Toyota Prius?A: The installation process for the skid control ECU begins with securing it using 3 nuts which should be torqued up to 5.0 Nm (51 kgf-cm, 44 in-lbf) and then connecting the 4 ECU connectors. The installation of wire harness clamp together with skid control buzzer must be done on the ABS Control Module bracket. The installation methods for the steering column assembly should continue up until the No 2. rear floor board installation stage. It is essential to attach your cable to the negative battery terminal while some systems might need to begin anew after reconnecting. Check the SRS warning light and start the process of initializing the brake system. Finish the procedure by executing the yaw rate sensor zero point calibration. Complete the procedure by examining and erasing the stored DTCs.