How to install the Crankshaft Position Sensor on 2009 Toyota Prius?

The Crankshaft Position Sensor for the 1NZ-FXE engine control system needs to be installed by securing it with a bolt at 7.5 Nm torque (76 kgf-cm or 66 in-lbf) followed by attaching the sensor connector. The next step involves installing the engine under cover on one side before reconnecting the cable which leads to the negative battery terminal. Finish the installation by performing system initialization because some systems need this procedure when the cable is taken off and reconnected from the negative (-) battery terminal.

OEM 2009 Toyota Prius Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2009 Toyota Prius Crankshaft Position Sensor
Part Number: 90919-05087
$71.09 MSRP: $99.79
You Save: $28.70 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Replaces: 90919-05045, 90919-05081
- Part Name Code: 15100Q
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-05087
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Prius Crankshaft Position Sensor

Looking for affordable OEM 2009 Toyota Prius Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Prius Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Prius Parts Questions & Experts Answers

Q: How to install the Crankshaft Position Sensor on 2009 Toyota Prius?
A: The Crankshaft Position Sensor for the 1NZ-FXE engine control system needs to be installed by securing it with a bolt at 7.5 Nm torque (76 kgf-cm or 66 in-lbf) followed by attaching the sensor connector. The next step involves installing the engine under cover on one side before reconnecting the cable which leads to the negative battery terminal. Finish the installation by performing system initialization because some systems need this procedure when the cable is taken off and reconnected from the negative (-) battery terminal.

Related 2009 Toyota Prius Parts

Alternate Year Models

2008 Toyota Prius Crankshaft Position Sensor 2010 Toyota Prius Crankshaft Position Sensor