How to Properly Install the ABS Control Module on 2008 Toyota Prius?

The installation process for the skid control ECU begins by attaching it with 3 nuts that need a torque of 5.0 Nm (51 kgf-cm, 44 in-lbf) while connecting its 4 ECU connectors. Fit the wire harness clamp along with the skid control buzzer to the bracket which holds the skid control ECU. Following the installation steps for the steering column assembly proceed to No 2. rear floor board installation. The cable must then be connected to the negative terminal of the battery while recognizing that initialization may be necessary for some systems after reconnecting. Execute a check of the SRS warning light while performing the brake system initialization procedures. Perform the yaw rate sensor zero point calibration as part of the maintenance process. The last step involves both checking and clearing DTCs.

OEM 2008 Toyota Prius ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Toyota Prius Modulator Valve
Part Number: 44500-47141
$1383.33 MSRP: $1741.34
You Save: $358.01 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44500-47140
- Item Weight: 17.60 Pounds
- Item Dimensions: 12.1 x 10.3 x 9.2 inches
- Condition: New
- SKU: 44500-47141
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Control Module
Part Number: 89540-47130
$2379.63 MSRP: $2995.49
You Save: $615.86 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer; Computer Assembly, Skid Control
- Replaces: 89540-47100, 89540-47080
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.0 x 6.4 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-47130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius ABS Control Module

Looking for affordable OEM 2008 Toyota Prius ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota Prius ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius ABS Control Module Parts Q&A

Q: How to Properly Install the ABS Control Module on 2008 Toyota Prius?
A: The installation process for the skid control ECU begins by attaching it with 3 nuts that need a torque of 5.0 Nm (51 kgf-cm, 44 in-lbf) while connecting its 4 ECU connectors. Fit the wire harness clamp along with the skid control buzzer to the bracket which holds the skid control ECU. Following the installation steps for the steering column assembly proceed to No 2. rear floor board installation. The cable must then be connected to the negative terminal of the battery while recognizing that initialization may be necessary for some systems after reconnecting. Execute a check of the SRS warning light while performing the brake system initialization procedures. Perform the yaw rate sensor zero point calibration as part of the maintenance process. The last step involves both checking and clearing DTCs.