Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left Outer, Rear Right Outer; Outer Belt Assembly; Rear Seat 3 Point Type, Outer Passenger & Driver Side.
Manufacturer Note: GREGE,TRIM4#
Position: Rear
Item Weight: 2.00 Pounds
Item Dimensions: 12.1 x 11.2 x 8.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-47041-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left Outer, Rear Right Outer; Outer Belt Assembly; Rear Seat 3 Point Type, Outer Passenger & Driver Side.
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2008 Toyota Prius Seat Belt
Looking for affordable OEM 2008 Toyota Prius Seat Belt? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Prius Seat Belt Parts Q&A
Q: How to Properly Install a Seat Belt in the Rear Seat Inner Belt Assembly on 2008 Toyota Prius?
A: The installation of the child restraint seat anchor bracket sub-assembly LH begins with attaching 2 bolts at 20 Nm torque (204 kgf-cm, 15 ft-lbf). The process for installing the child restraint seat anchor bracket sub-assembly RH requires two bolts applying a torque of 20 Nm (204 kgf-cm, 15 ft-lbf). Begin by installing the rear seat inner belt assembly center with a bolt while setting the bolt torque to 42 Nm (428 kgf-cm, 31 ft-lbf) and making sure the anchor part has no contact with the protruding floor panel section. To finish installation of the rear seat inner belt assembly RH piece, utilize a torque wrench set to 42 Nm (428 kgf-cm, 31 ft-lbf) then make sure the floor panel does not obstruct the anchor part. You should install the floor anchor part of the rear seat inner belt through its center by using a bolt before applying a torque of 42 Nm (428 kgf-cm, 31 ft-lbf) while ensuring that the anchor part stays away from hitting the protruding floor panel section. The last step includes assembly of the rear seat cushion.