Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left Outer, Rear Right Outer; Outer Belt Assembly; Rear Seat 3 Point Type, Outer Passenger & Driver Side.
Manufacturer Note: GREGE,TRIM4#
Position: Rear
Item Weight: 2.00 Pounds
Item Dimensions: 12.1 x 11.2 x 8.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-47041-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left Outer, Rear Right Outer; Outer Belt Assembly; Rear Seat 3 Point Type, Outer Passenger & Driver Side.
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2009 Toyota Prius Seat Belt
Looking for affordable OEM 2009 Toyota Prius Seat Belt? Explore our comprehensive catalogue of genuine 2009 Toyota Prius Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Prius Seat Belt Parts Q&A
Q: How to remove the front Seat Belt assembly on the RH side on 2009 Toyota Prius?
A: One should start by disconnecting the negative cable from the terminal to deactivate the pretensioners and Air Bags before proceeding with outer belt assembly removal on the right-hand front seat. Begin by taking off the front door scuff plate RH and the rear door scuff plate RH followed by the front door opening trim Weather Strip RH along with the rear door opening trim Weather Strip RH before removing the center pillar garnish lower RH and center pillar garnish RH. To uninstall the front seat outer belt assembly on the right-hand side begin by removing both the anchor cover and the floor anchor bolt and uninstall the shoulder anchor and nut and separate the pretensioner connector and disconnect the second bolts and outer belt. To finalize the operation remove the front shoulder belt anchor adjuster assembly by disconnecting both anchor adjuster and bolt.