How to remove the rear Wheelhouse on 2009 Toyota Highlander?

The main step to remove rear fender liner begins with removing the 3 screws from the rear wheel house pad LH followed by the same process for its corresponding RH side. Apply the identical steps to remove the panels from the rear of the vehicle. Heat the vehicle body along with the quarter panel seal by using a heat light before removing the quarter panel seal LH. Next remove the four screws and peeling off the double-sided tape before taking off the seal. The same procedure needs to be performed for the RH side as well. The repair of rear bumper side seal LH begins by detaching its clip, screw and bolt followed by removing two grommets. Note that grommets need new replacements since they break during extraction. Finish the removal by taking out the rear bumper side seal LH. Follow the identical procedures to remove the parts from the RH side. Remove the rear wheel house liner LH by detaching its 10 clips and repeat the process with the rear wheel house liner RH.

OEM 2009 Toyota Highlander Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheelhouses found

View related parts
2009 Toyota Highlander Fender Liner, Passenger Side
Part Number: 53805-0E040
$188.83 MSRP: $269.62
You Save: $80.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Right; Liner, Front Fender, Passenger Side; Fender Splash Shield
- Position: Passenger Side
- Replaces: 53805-48080
- Part Name Code: 53875A
- Item Weight: 3.10 Pounds
- Item Dimensions: 55.1 x 23.7 x 23.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53805-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Shield, Rear Driver Side
Part Number: 53808-0E040
$31.24 MSRP: $43.48
You Save: $12.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Hood Seal, Front Left, Left; Fender Splash Shield; Shield Sub-Assembly, Fender Splash, Rear Driver Side
- Position: Rear Driver Side
- Replaces: 53808-48010
- Part Name Code: 53808A
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53808-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Shield, Rear Passenger Side
Part Number: 53807-0E040
$31.24 MSRP: $43.48
You Save: $12.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Hood Seal, Front Right, Right; Fender Splash Shield; Shield Sub-Assembly, Fender Splash, Rear Passenger Side
- Position: Rear Passenger Side
- Replaces: 53807-48010
- Part Name Code: 53807A
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53807-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Fender Liner, Driver Side
Part Number: 53806-0E040
$188.83 MSRP: $269.62
You Save: $80.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
- Position: Driver Side
- Replaces: 53806-48080
- Part Name Code: 53876A
- Item Weight: 5.80 Pounds
- Item Dimensions: 19.8 x 18.7 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Fender Liner, Driver Side
Part Number: 53806-0E050
$188.14 MSRP: $268.62
You Save: $80.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
- Position: Driver Side
- Replaces: 53806-48090
- Part Name Code: 53876A
- Item Weight: 2.40 Pounds
- Item Dimensions: 49.4 x 18.5 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-0E050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Fender Liner, Driver Side
Part Number: 53806-48070
$200.89 MSRP: $286.83
You Save: $85.94 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
- Position: Driver Side
- Part Name Code: 53876A
- Item Weight: 4.30 Pounds
- Item Dimensions: 22.7 x 14.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-48070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Highlander Fender Liner, Passenger Side
Part Number: 53805-48070
$181.68 MSRP: $259.40
You Save: $77.72 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Right; Liner, Front Fender, Passenger Side; Fender Splash Shield
- Position: Passenger Side
- Part Name Code: 53875A
- Item Weight: 5.10 Pounds
- Item Dimensions: 18.7 x 18.5 x 18.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53805-48070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Highlander Wheelhouse

Looking for affordable OEM 2009 Toyota Highlander Wheelhouse? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Wheelhouse. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Highlander Parts Questions & Experts Answers

Q: How to remove the rear Wheelhouse on 2009 Toyota Highlander?
A: The main step to remove rear fender liner begins with removing the 3 screws from the rear wheel house pad LH followed by the same process for its corresponding RH side. Apply the identical steps to remove the panels from the rear of the vehicle. Heat the vehicle body along with the quarter panel seal by using a heat light before removing the quarter panel seal LH. Next remove the four screws and peeling off the double-sided tape before taking off the seal. The same procedure needs to be performed for the RH side as well. The repair of rear bumper side seal LH begins by detaching its clip, screw and bolt followed by removing two grommets. Note that grommets need new replacements since they break during extraction. Finish the removal by taking out the rear bumper side seal LH. Follow the identical procedures to remove the parts from the RH side. Remove the rear wheel house liner LH by detaching its 10 clips and repeat the process with the rear wheel house liner RH.