How to remove the front Wheelhouse on 2008 Toyota Highlander?

The first step of removing the front fender liner requires uninstalling the engine under cover assembly together with the No. 1 engine under cover. The same approach should be used for removing the front fender moulding sub-assembly LH and RH. The LH front wheel opening extension pad removal requires two screws before working on the LH front fender liner by unscrewing the single bolt followed by a pin holder clip removal using a screwdriver to rotate the pin 90 degrees then using a 4 mm hexagon wrench to remove the two screws followed by extracting the two grommets that need new replacements because they become damaged when removed. Finish the fender liner LH installation by removing its 5 clips along with 8 screws and the front fender liner LH piece. The RH front fender liner process requires removing one screw followed by turning the pin 90 degrees with a screwdriver to extract the pin hold clip then utilizing a 4 mm hexagon wrench to remove the two screws before eliminating the two grommets and finishing with the removal of the 5 clips and 7 screws and RH front fender liner.

OEM 2008 Toyota Highlander Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheelhouses found

View related parts
2008 Toyota Highlander Fender Liner, Passenger Side
Part Number: 53805-0E040
$188.83 MSRP: $269.62
You Save: $80.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Right; Liner, Front Fender, Passenger Side; Fender Splash Shield
- Position: Passenger Side
- Replaces: 53805-48080
- Part Name Code: 53875A
- Item Weight: 3.10 Pounds
- Item Dimensions: 55.1 x 23.7 x 23.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53805-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Shield, Rear Driver Side
Part Number: 53808-0E040
$31.24 MSRP: $43.48
You Save: $12.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Hood Seal, Front Left, Left; Fender Splash Shield; Shield Sub-Assembly, Fender Splash, Rear Driver Side
- Position: Rear Driver Side
- Replaces: 53808-48010
- Part Name Code: 53808A
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53808-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Shield, Rear Passenger Side
Part Number: 53807-0E040
$31.24 MSRP: $43.48
You Save: $12.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Hood Seal, Front Right, Right; Fender Splash Shield; Shield Sub-Assembly, Fender Splash, Rear Passenger Side
- Position: Rear Passenger Side
- Replaces: 53807-48010
- Part Name Code: 53807A
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53807-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Fender Liner, Driver Side
Part Number: 53806-0E040
$188.83 MSRP: $269.62
You Save: $80.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
- Position: Driver Side
- Replaces: 53806-48080
- Part Name Code: 53876A
- Item Weight: 5.80 Pounds
- Item Dimensions: 19.8 x 18.7 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Fender Liner, Driver Side
Part Number: 53806-0E050
$188.14 MSRP: $268.62
You Save: $80.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
- Position: Driver Side
- Replaces: 53806-48090
- Part Name Code: 53876A
- Item Weight: 2.40 Pounds
- Item Dimensions: 49.4 x 18.5 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-0E050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Fender Liner, Driver Side
Part Number: 53806-48070
$200.89 MSRP: $286.83
You Save: $85.94 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
- Position: Driver Side
- Part Name Code: 53876A
- Item Weight: 4.30 Pounds
- Item Dimensions: 22.7 x 14.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-48070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Highlander Fender Liner, Passenger Side
Part Number: 53805-48070
$181.68 MSRP: $259.40
You Save: $77.72 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Splash Shield, Front Right; Liner, Front Fender, Passenger Side; Fender Splash Shield
- Position: Passenger Side
- Part Name Code: 53875A
- Item Weight: 5.10 Pounds
- Item Dimensions: 18.7 x 18.5 x 18.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53805-48070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Highlander Wheelhouse

Looking for affordable OEM 2008 Toyota Highlander Wheelhouse? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Wheelhouse. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

Q: How to remove the front Wheelhouse on 2008 Toyota Highlander?
A: The first step of removing the front fender liner requires uninstalling the engine under cover assembly together with the No. 1 engine under cover. The same approach should be used for removing the front fender moulding sub-assembly LH and RH. The LH front wheel opening extension pad removal requires two screws before working on the LH front fender liner by unscrewing the single bolt followed by a pin holder clip removal using a screwdriver to rotate the pin 90 degrees then using a 4 mm hexagon wrench to remove the two screws followed by extracting the two grommets that need new replacements because they become damaged when removed. Finish the fender liner LH installation by removing its 5 clips along with 8 screws and the front fender liner LH piece. The RH front fender liner process requires removing one screw followed by turning the pin 90 degrees with a screwdriver to extract the pin hold clip then utilizing a 4 mm hexagon wrench to remove the two screws before eliminating the two grommets and finishing with the removal of the 5 clips and 7 screws and RH front fender liner.