Other Name: Motor&Pump Assembly, F; Windshield Washer Pump; Washer Pump Repair Kit; Motor & Pump Assembly; Front Pump; Front Washer Pump; Rear Washer Pump; Motor And Pump Assembly, Windshield Washer
Part Name Code: 85310
Item Weight: 0.60 Pounds
Item Dimensions: 13.8 x 12.0 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60190
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Motor&Pump Assembly, F; Back Glass Washer Pump; Washer Pump Repair Kit; Windshield Washer Pump; Rear Pump; Rear Washer Pump; Motor & Pump Assembly, Rear Washer; Motor Assembly, Rear Washer
Item Weight: 0.60 Pounds
Item Dimensions: 14.0 x 12.2 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85330-60180
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
2009 Toyota Highlander Washer Pump
Looking for affordable OEM 2009 Toyota Highlander Washer Pump? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Washer Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Highlander Washer Pump Parts Q&A
Q: How to install the front Washer Pump assembly on 2009 Toyota Highlander?
A: The first step to install the front washer motor and pump assembly requires connector connection. Attach the washer hose to the front washer pump and motor assembly before filling the fluid jar with washer fluid. The RH front fender liner installation needs to precede the front fender moulding sub-assembly RH installation. The installer should set up the front bumper assembly either without fog lights or with fog lights if needed. The installation process requires placing the radiator grille followed by installing the cool air intake duct seal. You should now install the No. 1 engine under cover. The procedure for fog light aiming must be prepared in advance for all vehicles that have fog lights. Adjustments must be made to the aiming during this process.