Other Name: Motor Assembly, Rear Wiper; Back Glass Wiper Motor; Rear Motor
Manufacturer Note: BACK GLASS-WITH(GLASS HATCH-BACK DOOR)
Position: Rear
Replaces: 85130-0E050, 85130-48040
Part Name Code: 85110R
Item Weight: 1.40 Pounds
Item Dimensions: 12.4 x 10.6 x 8.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85130-0E051
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Motor Assembly, Rear Wiper; Back Glass Wiper Motor; Rear Motor
Position: Rear
Part Name Code: 85110R
Item Weight: 2.60 Pounds
Item Dimensions: 9.7 x 5.6 x 4.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85130-48050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
2009 Toyota Highlander Wiper Motor
Looking for affordable OEM 2009 Toyota Highlander Wiper Motor? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Wiper Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Highlander Wiper Motor Parts Q&A
Q: How to install the rear wiper motor assembly for the Fixed Glass Type and Glass Hatch Type on 2009 Toyota Highlander?
A: The procedure for fixed glass type rear wiper motor assembly installation includes attaching 4 bolts with torque at 5.5 Nm (56 kgf-cm, 49 in-lbf) avoiding contact to back door glass and connector connection. When installing the Glass Hatch Type rear wiper motor assembly with 4 bolts and 2 nuts users must avoid holding the rear wiper link pivot and keep the centering jig in place until the rear wiper link pivot installation. Thread bolts to 5.5 Nm (56 kgf-cm, 49 in-lbf) before adding nuts to 8.0 Nm (82 kgf-cm, 71 in-lbf) then attach the connector. The top end of the grommet lip requires MP grease before installing as the first step for Fixed Glass Type installations. During Glass Hatch Type installation install the rear wiper link pivot with its nut tightened to 7.0 Nm (71 kgf-cm, 62 in-lbf) before opening the glass hatch and breaking guiding contact while removing the centering fixture to close the hatch completely. Place MP grease on the rear wiper link cap then install it in position. The procedure for both types requires stopping the wiper motor at automatic stop then cleaning wiper arm serrations and pivot before aligning the blade with the ceramic line followed by rear wiper arm installation with torques at 5.5 Nm (56 kgf-cm, 49 in-lbf) while maintaining pressure on the wiper arm during nut tightening. To install the rear wiper arm head cap push it downward until you hear a clicking sound. Put the glass hatch open while you secure the clips before setting the rear wiper shaft cover into place. Check the rear wiper works without problems using washer fluid through its operation. For the Glass Hatch Type lock cover installation follows the assist strap assembly and assist strap hole cover before a power back door rod connection and placement of the back door service hole cover LH (optional) before installing back door trim cover RH and back window upper trim panel assembly.