How to install the rear Suspension Strut Rod on 2009 Toyota Camry?

The first step for installing the rear strut rod requires temporarily tightening the rear strut rod (rear side) using bolt and nut while maintaining the nut from rotation. Secure the rear axle carrier while connecting the rear strut rod (inner side) to its bolt and nut by preventing nut rotation during screwing. The rear axle carrier needs to be raised using a wooden block to prevent damage then load must be applied to the suspension until the rear suspension No. 1 arm inner side bolt becomes horizontally aligned with the center of the rear axle hub. Both bolts need to reach a tightness of 113 Nm (1,152 kgf-cm, 83ft-lbf). Fasten the parking brake No. 3 cable assembly with its bolt then tighten it to 6.0 Nm (61 kgf-cm, 53in-lbf). The rear wheel installation should conclude with torquing it to 103 Nm (1,050 kgf-cm, 76ft-lbf).

OEM 2009 Toyota Camry Suspension Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Suspension Strut Rods found

View related parts
2009 Toyota Camry Trailing Arm, Rear
Part Number: 48780-07020
$125.01 MSRP: $176.96
You Save: $51.95 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-07010
- Part Name Code: 48780A
- Item Weight: 4.20 Pounds
- Item Dimensions: 27.5 x 4.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-07020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut Rod, Rear
Part Number: 48780-06030
$105.93 MSRP: $148.69
You Save: $42.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-06020
- Part Name Code: 48780A
- Item Weight: 4.00 Pounds
- Item Dimensions: 26.5 x 4.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Trailing Arm, Rear
Part Number: 48780-33040
$106.16 MSRP: $149.02
You Save: $42.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Part Name Code: 48780A
- Item Weight: 2.40 Pounds
- Item Dimensions: 23.0 x 5.6 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-33040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Camry Suspension Strut Rod

Looking for affordable OEM 2009 Toyota Camry Suspension Strut Rod? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Suspension Strut Rod. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Suspension Strut Rod Parts Q&A

Q: How to install the rear Suspension Strut Rod on 2009 Toyota Camry?
A: The first step for installing the rear strut rod requires temporarily tightening the rear strut rod (rear side) using bolt and nut while maintaining the nut from rotation. Secure the rear axle carrier while connecting the rear strut rod (inner side) to its bolt and nut by preventing nut rotation during screwing. The rear axle carrier needs to be raised using a wooden block to prevent damage then load must be applied to the suspension until the rear suspension No. 1 arm inner side bolt becomes horizontally aligned with the center of the rear axle hub. Both bolts need to reach a tightness of 113 Nm (1,152 kgf-cm, 83ft-lbf). Fasten the parking brake No. 3 cable assembly with its bolt then tighten it to 6.0 Nm (61 kgf-cm, 53in-lbf). The rear wheel installation should conclude with torquing it to 103 Nm (1,050 kgf-cm, 76ft-lbf).

Alternate Year Models

2008 Toyota Camry Suspension Strut Rod 2010 Toyota Camry Suspension Strut Rod