How to install the front Sway Bar Kit on 2009 Toyota Camry?

Start the front sway bar kit installation with the step of positioning both front sway bar bushings No. 1 outside the bushing stoppers on the sway bar kit while facing the rear side with their cutouts. You should first install the front No. 1 sway bar bracket LH and then move to the front No. 1 sway bar bracket RH installation. Use two bolts on both sides of the LH and RH to fasten the front sway bar kit before tightening them to 27 Nm (275 kgf-cm, 20 ft-lbf). Finally install the pair that includes the engine unit and transaxle. Fasten the front sway bar link assembly LH and RH by tightening 2 nuts to 74 Nm (755 kgf-cm, 55 ft-lbf); in case the ball joint spins with the nut, use a hexagon (6 mm) wrench to stabilize the stud. The procedure to install the front wheels requires the tie rod end sub-assembly connection to the steering intermediate shaft assembly when the wheels face straight ahead. Secure the front wheels and tighten them to 103 Nm (1,050 kgf-cm, 76 ft-lbf). The last step includes connecting the cable to the negative battery terminal followed by front wheel alignment inspection and adjustment.

OEM 2009 Toyota Camry Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
2009 Toyota Camry Stabilizer Bar, Front
Part Number: 48811-06150
$138.29 MSRP: $195.76
You Save: $57.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 8.20 Pounds
- Item Dimensions: 43.8 x 12.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-06150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Stabilizer Bar, Front
Part Number: 48811-06050
$122.19 MSRP: $172.97
You Save: $50.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-33160
- Part Name Code: 48811
- Item Weight: 8.20 Pounds
- Item Dimensions: 43.8 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-06050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-06090
$102.61 MSRP: $144.03
You Save: $41.42 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.00 Pounds
- Item Dimensions: 42.8 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-06090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Bar, Stabilizer, Rear
Part Number: 48812-06080
$76.66 MSRP: $107.60
You Save: $30.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Replaces: 48812-33210
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 41.5 x 9.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-06080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-06170
$79.50 MSRP: $111.59
You Save: $32.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-33240
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 41.1 x 9.1 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-06170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Camry Sway Bar Kit

Looking for affordable OEM 2009 Toyota Camry Sway Bar Kit? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Parts Questions & Experts Answers

Q: How to install the front Sway Bar Kit on 2009 Toyota Camry?
A: Start the front sway bar kit installation with the step of positioning both front sway bar bushings No. 1 outside the bushing stoppers on the sway bar kit while facing the rear side with their cutouts. You should first install the front No. 1 sway bar bracket LH and then move to the front No. 1 sway bar bracket RH installation. Use two bolts on both sides of the LH and RH to fasten the front sway bar kit before tightening them to 27 Nm (275 kgf-cm, 20 ft-lbf). Finally install the pair that includes the engine unit and transaxle. Fasten the front sway bar link assembly LH and RH by tightening 2 nuts to 74 Nm (755 kgf-cm, 55 ft-lbf); in case the ball joint spins with the nut, use a hexagon (6 mm) wrench to stabilize the stud. The procedure to install the front wheels requires the tie rod end sub-assembly connection to the steering intermediate shaft assembly when the wheels face straight ahead. Secure the front wheels and tighten them to 103 Nm (1,050 kgf-cm, 76 ft-lbf). The last step includes connecting the cable to the negative battery terminal followed by front wheel alignment inspection and adjustment.