How to install the front shock absorber with coil spring on 2009 Toyota Camry?

The front shock absorber with coil spring installation requires first positioning it onto the front axle assembly followed by inserting the front-side bolts into the vehicle. The vehicle must be carefully lifted with a wooden block before the front shock absorber with coil spring's upper end can be attached to the vehicle using 3 nuts torqued to 85 Nm (867 kgf-cm, 63 ft-lbf). Secure the two nuts on the lower portion of the front shock absorber with coil spring but avoid bolt rotation while torquing them to 210 Nm (2,140 kgf-cm, 155 ft-lbf). Install the front flexible hose together with front speed sensor wire harness by using a bolt that requires 19 Nm (194 kgf-cm, 14 ft-lbf) torque while being cautious to avoid wire harness twisting. You must tighten the lock nut to 70 Nm (714 kgf-cm, 52 ft-lbf) when completing it. After installing the front stabilizer link assembly with a nut use a hexagon wrench (6 mm) to hold the stud if the ball joint turns with the nut while torquing it to 74 Nm (755 kgf-cm, 55 ft-lbf). Install the front wheel before performing torqueing it to 103 Nm (1,050 kgf-cm, 76 ft-lbf).

OEM 2009 Toyota Camry Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Shock Absorbers found

View related parts
2009 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09810
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06490
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.50 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09810
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09680
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06410
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 7.00 Pounds
- Item Dimensions: 25.8 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09680
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09K90
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06410
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.80 Pounds
- Item Dimensions: 25.6 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09K90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09760
$140.61 MSRP: $199.06
You Save: $58.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06470
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.4 x 6.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09760
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-80011
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06550
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.80 Pounds
- Item Dimensions: 25.8 x 6.6 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-80011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-80528
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06550
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.50 Pounds
- Item Dimensions: 26.9 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80528
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09N60
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06490
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.50 Pounds
- Item Dimensions: 26.1 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N60
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09M20
$140.61 MSRP: $199.06
You Save: $58.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06470
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.80 Pounds
- Item Dimensions: 26.4 x 6.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09M20
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09K70
$140.61 MSRP: $199.06
You Save: $58.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06330
- Position: Rear Passenger Side
- Replaces: 48530-89015
- Part Name Code: 48530
- Item Weight: 15.80 Pounds
- Item Dimensions: 31.2 x 20.2 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09K70
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09660
$137.82 MSRP: $195.10
You Save: $57.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06330
- Position: Rear Driver Side
- Replaces: 48540-39745
- Part Name Code: 48540
- Item Weight: 15.30 Pounds
- Item Dimensions: 32.9 x 21.0 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09660
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-39795
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-33410
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.4 x 6.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-39795
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-80370
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-33410
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.70 Pounds
- Item Dimensions: 25.8 x 6.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80370
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Strut, Front Passenger Side
Part Number: 48510-09N10
$125.71 MSRP: $177.96
You Save: $52.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Strut, Front Right; Shock Absorber; Absorber Assembly, Shock, Front Passenger Side
- Position: Front Passenger Side
- Part Name Code: 48510
- Item Weight: 12.20 Pounds
- Item Dimensions: 27.1 x 8.3 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09N10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS

2009 Toyota Camry Shock Absorber

Looking for affordable OEM 2009 Toyota Camry Shock Absorber? Explore our comprehensive catalogue of genuine 2009 Toyota Camry Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Shock Absorber Parts Questions & Experts Answers

Q: How to install the front shock absorber with coil spring on 2009 Toyota Camry?
A: The front shock absorber with coil spring installation requires first positioning it onto the front axle assembly followed by inserting the front-side bolts into the vehicle. The vehicle must be carefully lifted with a wooden block before the front shock absorber with coil spring's upper end can be attached to the vehicle using 3 nuts torqued to 85 Nm (867 kgf-cm, 63 ft-lbf). Secure the two nuts on the lower portion of the front shock absorber with coil spring but avoid bolt rotation while torquing them to 210 Nm (2,140 kgf-cm, 155 ft-lbf). Install the front flexible hose together with front speed sensor wire harness by using a bolt that requires 19 Nm (194 kgf-cm, 14 ft-lbf) torque while being cautious to avoid wire harness twisting. You must tighten the lock nut to 70 Nm (714 kgf-cm, 52 ft-lbf) when completing it. After installing the front stabilizer link assembly with a nut use a hexagon wrench (6 mm) to hold the stud if the ball joint turns with the nut while torquing it to 74 Nm (755 kgf-cm, 55 ft-lbf). Install the front wheel before performing torqueing it to 103 Nm (1,050 kgf-cm, 76 ft-lbf).

Related 2009 Toyota Camry Parts

Alternate Year Models

2008 Toyota Camry Shock Absorber 2010 Toyota Camry Shock Absorber