How do you install the rear Suspension Strut Rod and related components on 2010 Toyota Camry?

The rear strut rod installation process requires users to connect the rear strut rod (rear side) together with bolt and nut yet tighten only the bolt carefully until the nut stays stable. Install the rear strut rod (inner side) to the rear axle carrier while supporting it with temporary consegations on the bolt and nut with a precaution to keep the nut stationary. Following the jack-up of the rear axle carrier through use of a wooden block for protection you must apply suspension load until the rear suspension No. 1 arm inner side bolt becomes fully horizontal relative to the rear axle hub center. Use a torque of 113 Nm to fully tighten both bolts and adjust the bolt torque to 1,152 kgf-cm or 83 ft-lbf. Fasten the parking brake No. 3 cable assembly with the bolt while tightening to achieve 6.0 Nm torque (61 kgf-cm, 53 in-lbf). Before tubing the floors, install floor No. 1 under cover by using six nuts and then complete floor No. 2 under cover installation using six nuts while incorporating two clips. Users should install the rear wheel then apply torque force of 103 Nm (1,050 kgf-cm, 76 ft-lbf).

OEM 2010 Toyota Camry Suspension Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Suspension Strut Rods found

View related parts
2010 Toyota Camry Trailing Arm, Rear
Part Number: 48780-07020
$124.98 MSRP: $176.93
You Save: $51.95 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-07010
- Part Name Code: 48780A
- Item Weight: 4.20 Pounds
- Item Dimensions: 27.5 x 4.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-07020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Strut Rod, Rear
Part Number: 48780-06030
$105.82 MSRP: $148.53
You Save: $42.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-06020
- Part Name Code: 48780A
- Item Weight: 4.00 Pounds
- Item Dimensions: 26.5 x 4.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Trailing Arm, Rear
Part Number: 48780-33040
$106.16 MSRP: $149.02
You Save: $42.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Part Name Code: 48780A
- Item Weight: 2.40 Pounds
- Item Dimensions: 23.0 x 5.6 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-33040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2010 Toyota Camry Suspension Strut Rod

Looking for affordable OEM 2010 Toyota Camry Suspension Strut Rod? Explore our comprehensive catalogue of genuine 2010 Toyota Camry Suspension Strut Rod. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Camry Parts Questions & Experts Answers

Q: How do you install the rear Suspension Strut Rod and related components on 2010 Toyota Camry?
A: The rear strut rod installation process requires users to connect the rear strut rod (rear side) together with bolt and nut yet tighten only the bolt carefully until the nut stays stable. Install the rear strut rod (inner side) to the rear axle carrier while supporting it with temporary consegations on the bolt and nut with a precaution to keep the nut stationary. Following the jack-up of the rear axle carrier through use of a wooden block for protection you must apply suspension load until the rear suspension No. 1 arm inner side bolt becomes fully horizontal relative to the rear axle hub center. Use a torque of 113 Nm to fully tighten both bolts and adjust the bolt torque to 1,152 kgf-cm or 83 ft-lbf. Fasten the parking brake No. 3 cable assembly with the bolt while tightening to achieve 6.0 Nm torque (61 kgf-cm, 53 in-lbf). Before tubing the floors, install floor No. 1 under cover by using six nuts and then complete floor No. 2 under cover installation using six nuts while incorporating two clips. Users should install the rear wheel then apply torque force of 103 Nm (1,050 kgf-cm, 76 ft-lbf).