Other Name: Motor Assembly, Power Window Regulator; Motor, Center Left, Front Left, Rear Left, Rear Right; Door Lock Actuator; Motor; Power Window Regulator Assembly for Front Driver, Passenger, and Driver Side.
Replaces: 85720-35140
Item Weight: 1.30 Pounds
Item Dimensions: 7.4 x 4.6 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85720-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Motor Assembly, Power Window Regulator; Center Right, Front Right, Rear Left, Rear Right, Right; Motor; Power Window Regulator Assembly for Front Passenger, Driver, and Passenger Side.
Replaces: 85710-35180
Item Weight: 1.30 Pounds
Item Dimensions: 7.7 x 4.7 x 4.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85710-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Motor Assembly, Power Window Regulator; Power Window Motor, Front Left, Rear Right; Door Lock Actuator Motor; Motor Assembly, Power Window Regulator, Passenger Side; Driver Side; Power Window Motor
Replaces: 85720-58010
Item Weight: 1.40 Pounds
Item Dimensions: 8.0 x 5.8 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85720-AE020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Scion xD Submodels:
Base | 4 Cyl 1.8 L GAS
2009 Scion xD Window Motor
Looking for affordable OEM 2009 Scion xD Window Motor? Explore our comprehensive catalogue of genuine 2009 Scion xD Window Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Scion xD Parts Questions & Experts Answers
Q: How do you remove the Window Motor on 2009 Scion xD?
A: The beginning of power window regulator motor removal requires disconnecting the negative battery terminal cable first. The procedures for the RH side include taking off the front armrest base upper panel as well as the front door lower frame bracket garnish together with the front door inside handle bezel, front door trim board sub-assembly and front door trim bracket and front door service hole cover and front door glass sub-assembly and front door window regulator sub-assembly. The front power window regulator motor assembly needs its 3 screws removed by using a "TORX" socket wrench T25. The procedure for working on the rear door begins with taking out the rear door armrest base upper panel together with the rear door inside handle bezel and rear door trim board sub-assembly, rear door trim bracket, rear door service hole cover and rear door glass run. The installation of the rear door window division bar starts by removing the screw on its upper section and the 2 bolts and screw which holds the whole bar together. Do it carefully to prevent damage to the bar. Use a "TORX" socket wrench T25 to take out the 3 screws fastening the rear power window regulator motor assembly after you have removed the rear door glass sub-assembly along with rear door window regulator sub-assembly.